Hi, I've just committed r4010. I think I found the bug that caused the wrong reliefs or empty rectangles. Next step is to calculate multiple levels. @Frank: I forgot to make the number of zero bits depended on the previously calculated plateau length. The corresponding code in your program if (iPlateauLengthBinBits >= 0) // bei Plateaufollower weniger Bit erlaubt lbits -= iPlateauLengthBinBits + 1; I think that this makes only sense if a BigBin value changes something, e.g. resets a flag or increases/decreases a counter. Else it would just be a waste of space. I think you mentioned something like that in the pdf as well. Gerd
Hi Arndt, Good point. I think I can add code to search in multiple directories, for now you have to put them into one dir. Note that 1'' files and 3'' files have the same name, so if you want to use the 1'' files make sure that you don't replace them by 3'' files. Gerd ________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von Arndt Röhrig <arndt@speichenkarte.de> Gesendet: Donnerstag, 21. Dezember 2017 20:00:44 An: Development list for mkgmap Betreff: Re: [mkgmap-dev] mkgmap r4010 Hi, This is fantastic, thank you for this work! I don´t understand anything what you do, but it works and my maps looks much better. I use phyghtmap to get the hgt Files. phyghtmap stores the files in 4 folders, view3, view1, srtm3 and srtm1. Can i tell x-dem to look in all 4 folders? Or must i copy all hgts in one folder? Arndt Gerd Petermann hat am 21. Dezember 2017 um 18:10 geschrieben: Hi, I've just committed r4010. I think I found the bug that caused the wrong reliefs or empty rectangles. Next step is to calculate multiple levels. @Frank: I forgot to make the number of zero bits depended on the previously calculated plateau length. The corresponding code in your program if (iPlateauLengthBinBits >= 0) // bei Plateaufollower weniger Bit erlaubt lbits -= iPlateauLengthBinBits + 1; I think that this makes only sense if a BigBin value changes something, e.g. resets a flag or increases/decreases a counter. Else it would just be a waste of space. I think you mentioned something like that in the pdf as well. Gerd _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap<mailto:mkgmap-dev@lists.mkgmap>.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
Hi Arndt, In r4011 you can specify multiple paths in a comma separated list. Sample : --x-dem=f:\osm\phyghtmap\hgt\SRTM1,f:\osm\phyghtmap\hgt\SRTM3 If there are blanks in the path make sure to use quotes, e.g. (on Windows): --x-dem="f:\my owm data\phyghtmap\hgt\SRTM1","f:\my owm data\phyghtmap\hgt\SRTM3" Don't add blanks before or after the comma. Gerd ________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von Gerd Petermann <gpetermann_muenchen@hotmail.com> Gesendet: Donnerstag, 21. Dezember 2017 20:33:32 An: Development list for mkgmap Betreff: Re: [mkgmap-dev] mkgmap r4010 Hi Arndt, Good point. I think I can add code to search in multiple directories, for now you have to put them into one dir. Note that 1'' files and 3'' files have the same name, so if you want to use the 1'' files make sure that you don't replace them by 3'' files. Gerd ________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von Arndt Röhrig <arndt@speichenkarte.de> Gesendet: Donnerstag, 21. Dezember 2017 20:00:44 An: Development list for mkgmap Betreff: Re: [mkgmap-dev] mkgmap r4010 Hi, This is fantastic, thank you for this work! I don´t understand anything what you do, but it works and my maps looks much better. I use phyghtmap to get the hgt Files. phyghtmap stores the files in 4 folders, view3, view1, srtm3 and srtm1. Can i tell x-dem to look in all 4 folders? Or must i copy all hgts in one folder? Arndt Gerd Petermann hat am 21. Dezember 2017 um 18:10 geschrieben: Hi, I've just committed r4010. I think I found the bug that caused the wrong reliefs or empty rectangles. Next step is to calculate multiple levels. @Frank: I forgot to make the number of zero bits depended on the previously calculated plateau length. The corresponding code in your program if (iPlateauLengthBinBits >= 0) // bei Plateaufollower weniger Bit erlaubt lbits -= iPlateauLengthBinBits + 1; I think that this makes only sense if a BigBin value changes something, e.g. resets a flag or increases/decreases a counter. Else it would just be a waste of space. I think you mentioned something like that in the pdf as well. Gerd _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap<mailto:mkgmap-dev@lists.mkgmap>.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
Hi Gerd Would it be possible to have a compiled version of r4011 so I can do further testing? Regards Nick On 22/12/2017 08:35, Gerd Petermann wrote:
Hi Arndt,
In r4011 you can specify multiple paths in a comma separated list.
Sample : --x-dem=f:\osm\phyghtmap\hgt\SRTM1,f:\osm\phyghtmap\hgt\SRTM3 If there are blanks in the path make sure to use quotes, e.g. (on Windows): --x-dem="f:\my owm data\phyghtmap\hgt\SRTM1","f:\my owm data\phyghtmap\hgt\SRTM3" Don't add blanks before or after the comma.
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von Gerd Petermann <gpetermann_muenchen@hotmail.com> Gesendet: Donnerstag, 21. Dezember 2017 20:33:32 An: Development list for mkgmap Betreff: Re: [mkgmap-dev] mkgmap r4010
Hi Arndt,
Good point. I think I can add code to search in multiple directories, for now you have to put them into one dir. Note that 1'' files and 3'' files have the same name, so if you want to use the 1'' files make sure that you don't replace them by 3'' files.
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von Arndt Röhrig <arndt@speichenkarte.de> Gesendet: Donnerstag, 21. Dezember 2017 20:00:44 An: Development list for mkgmap Betreff: Re: [mkgmap-dev] mkgmap r4010
Hi,
This is fantastic, thank you for this work!
I don´t understand anything what you do, but it works and my maps looks much better.
I use phyghtmap to get the hgt Files. phyghtmap stores the files in 4 folders, view3, view1, srtm3 and srtm1. Can i tell x-dem to look in all 4 folders? Or must i copy all hgts in one folder?
Arndt
Gerd Petermann hat am 21. Dezember 2017 um 18:10 geschrieben:
Hi,
I've just committed r4010. I think I found the bug that caused the wrong reliefs or empty rectangles. Next step is to calculate multiple levels.
@Frank: I forgot to make the number of zero bits depended on the previously calculated plateau length. The corresponding code in your program if (iPlateauLengthBinBits >= 0) // bei Plateaufollower weniger Bit erlaubt lbits -= iPlateauLengthBinBits + 1;
I think that this makes only sense if a BigBin value changes something, e.g. resets a flag or increases/decreases a counter. Else it would just be a waste of space. I think you mentioned something like that in the pdf as well.
Gerd _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap<mailto:mkgmap-dev@lists.mkgmap>.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
Hi Nick, sure, look at the bottom of http://www.mkgmap.org.uk/download/mkgmap.html to find the latest branch builds. Gerd ________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von garmin tools <osm@pinns.co.uk> Gesendet: Freitag, 22. Dezember 2017 08:38:15 An: mkgmap-dev@lists.mkgmap.org.uk Betreff: Re: [mkgmap-dev] mkgmap r4010 Hi Gerd Would it be possible to have a compiled version of r4011 so I can do further testing? Regards Nick On 22/12/2017 08:35, Gerd Petermann wrote:
Hi Arndt,
In r4011 you can specify multiple paths in a comma separated list.
Sample : --x-dem=f:\osm\phyghtmap\hgt\SRTM1,f:\osm\phyghtmap\hgt\SRTM3 If there are blanks in the path make sure to use quotes, e.g. (on Windows): --x-dem="f:\my owm data\phyghtmap\hgt\SRTM1","f:\my owm data\phyghtmap\hgt\SRTM3" Don't add blanks before or after the comma.
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von Gerd Petermann <gpetermann_muenchen@hotmail.com> Gesendet: Donnerstag, 21. Dezember 2017 20:33:32 An: Development list for mkgmap Betreff: Re: [mkgmap-dev] mkgmap r4010
Hi Arndt,
Good point. I think I can add code to search in multiple directories, for now you have to put them into one dir. Note that 1'' files and 3'' files have the same name, so if you want to use the 1'' files make sure that you don't replace them by 3'' files.
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von Arndt Röhrig <arndt@speichenkarte.de> Gesendet: Donnerstag, 21. Dezember 2017 20:00:44 An: Development list for mkgmap Betreff: Re: [mkgmap-dev] mkgmap r4010
Hi,
This is fantastic, thank you for this work!
I don´t understand anything what you do, but it works and my maps looks much better.
I use phyghtmap to get the hgt Files. phyghtmap stores the files in 4 folders, view3, view1, srtm3 and srtm1. Can i tell x-dem to look in all 4 folders? Or must i copy all hgts in one folder?
Arndt
Gerd Petermann hat am 21. Dezember 2017 um 18:10 geschrieben:
Hi,
I've just committed r4010. I think I found the bug that caused the wrong reliefs or empty rectangles. Next step is to calculate multiple levels.
@Frank: I forgot to make the number of zero bits depended on the previously calculated plateau length. The corresponding code in your program if (iPlateauLengthBinBits >= 0) // bei Plateaufollower weniger Bit erlaubt lbits -= iPlateauLengthBinBits + 1;
I think that this makes only sense if a BigBin value changes something, e.g. resets a flag or increases/decreases a counter. Else it would just be a waste of space. I think you mentioned something like that in the pdf as well.
Gerd _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap<mailto:mkgmap-dev@lists.mkgmap>.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
Many thanks , Gerd ! On 22/12/2017 08:56, Gerd Petermann wrote:
Hi Nick,
sure, look at the bottom of http://www.mkgmap.org.uk/download/mkgmap.html to find the latest branch builds.
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von garmin tools <osm@pinns.co.uk> Gesendet: Freitag, 22. Dezember 2017 08:38:15 An: mkgmap-dev@lists.mkgmap.org.uk Betreff: Re: [mkgmap-dev] mkgmap r4010
Hi Gerd
Would it be possible to have a compiled version of r4011 so I can do further testing?
Regards
Nick
On 22/12/2017 08:35, Gerd Petermann wrote:
Hi Arndt,
In r4011 you can specify multiple paths in a comma separated list.
Sample : --x-dem=f:\osm\phyghtmap\hgt\SRTM1,f:\osm\phyghtmap\hgt\SRTM3 If there are blanks in the path make sure to use quotes, e.g. (on Windows): --x-dem="f:\my owm data\phyghtmap\hgt\SRTM1","f:\my owm data\phyghtmap\hgt\SRTM3" Don't add blanks before or after the comma.
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von Gerd Petermann <gpetermann_muenchen@hotmail.com> Gesendet: Donnerstag, 21. Dezember 2017 20:33:32 An: Development list for mkgmap Betreff: Re: [mkgmap-dev] mkgmap r4010
Hi Arndt,
Good point. I think I can add code to search in multiple directories, for now you have to put them into one dir. Note that 1'' files and 3'' files have the same name, so if you want to use the 1'' files make sure that you don't replace them by 3'' files.
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von Arndt Röhrig <arndt@speichenkarte.de> Gesendet: Donnerstag, 21. Dezember 2017 20:00:44 An: Development list for mkgmap Betreff: Re: [mkgmap-dev] mkgmap r4010
Hi,
This is fantastic, thank you for this work!
I don´t understand anything what you do, but it works and my maps looks much better.
I use phyghtmap to get the hgt Files. phyghtmap stores the files in 4 folders, view3, view1, srtm3 and srtm1. Can i tell x-dem to look in all 4 folders? Or must i copy all hgts in one folder?
Arndt
Gerd Petermann hat am 21. Dezember 2017 um 18:10 geschrieben:
Hi,
I've just committed r4010. I think I found the bug that caused the wrong reliefs or empty rectangles. Next step is to calculate multiple levels.
@Frank: I forgot to make the number of zero bits depended on the previously calculated plateau length. The corresponding code in your program if (iPlateauLengthBinBits >= 0) // bei Plateaufollower weniger Bit erlaubt lbits -= iPlateauLengthBinBits + 1;
I think that this makes only sense if a BigBin value changes something, e.g. resets a flag or increases/decreases a counter. Else it would just be a waste of space. I think you mentioned something like that in the pdf as well.
Gerd _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap<mailto:mkgmap-dev@lists.mkgmap>.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
Hi , which hgt will mkgmap use, if multipath for hgt is definied and in both paths are the same areas?. which hgt-file is used? The first found and the second is ignored? Or the second is used?. Thomas -------------------------------------------------- Von: "Gerd Petermann" <gpetermann_muenchen@hotmail.com> Datum: Freitag, 22. Dezember 2017 07:56 An: "Development list for mkgmap" <mkgmap-dev@lists.mkgmap.org.uk> Betreff: Re: [mkgmap-dev] mkgmap r4010
Hi Nick,
sure, look at the bottom of http://www.mkgmap.org.uk/download/mkgmap.html to find the latest branch builds.
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von garmin tools <osm@pinns.co.uk> Gesendet: Freitag, 22. Dezember 2017 08:38:15 An: mkgmap-dev@lists.mkgmap.org.uk Betreff: Re: [mkgmap-dev] mkgmap r4010
Hi Gerd
Would it be possible to have a compiled version of r4011 so I can do further testing?
Regards
Nick
On 22/12/2017 08:35, Gerd Petermann wrote:
Hi Arndt,
In r4011 you can specify multiple paths in a comma separated list.
Sample : --x-dem=f:\osm\phyghtmap\hgt\SRTM1,f:\osm\phyghtmap\hgt\SRTM3 If there are blanks in the path make sure to use quotes, e.g. (on Windows): --x-dem="f:\my owm data\phyghtmap\hgt\SRTM1","f:\my owm data\phyghtmap\hgt\SRTM3" Don't add blanks before or after the comma.
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von Gerd Petermann <gpetermann_muenchen@hotmail.com> Gesendet: Donnerstag, 21. Dezember 2017 20:33:32 An: Development list for mkgmap Betreff: Re: [mkgmap-dev] mkgmap r4010
Hi Arndt,
Good point. I think I can add code to search in multiple directories, for now you have to put them into one dir. Note that 1'' files and 3'' files have the same name, so if you want to use the 1'' files make sure that you don't replace them by 3'' files.
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von Arndt Röhrig <arndt@speichenkarte.de> Gesendet: Donnerstag, 21. Dezember 2017 20:00:44 An: Development list for mkgmap Betreff: Re: [mkgmap-dev] mkgmap r4010
Hi,
This is fantastic, thank you for this work!
I don´t understand anything what you do, but it works and my maps looks much better.
I use phyghtmap to get the hgt Files. phyghtmap stores the files in 4 folders, view3, view1, srtm3 and srtm1. Can i tell x-dem to look in all 4 folders? Or must i copy all hgts in one folder?
Arndt
Gerd Petermann hat am 21. Dezember 2017 um 18:10 geschrieben:
Hi,
I've just committed r4010. I think I found the bug that caused the wrong reliefs or empty rectangles. Next step is to calculate multiple levels.
@Frank: I forgot to make the number of zero bits depended on the previously calculated plateau length. The corresponding code in your program if (iPlateauLengthBinBits >= 0) // bei Plateaufollower weniger Bit erlaubt lbits -= iPlateauLengthBinBits + 1;
I think that this makes only sense if a BigBin value changes something, e.g. resets a flag or increases/decreases a counter. Else it would just be a waste of space. I think you mentioned something like that in the pdf as well.
Gerd _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap<mailto:mkgmap-dev@lists.mkgmap>.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
Hi Thomas, Sorry, seems I mentioned this only in the svn log: The directories are searched in the given order, so first match is used. This raises one question: if you have multiple files with the same name, the first might be older and contain holes while the 2nd is better. Maybe in the future I'll add code to try other files when a hole is found. Gerd ________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von Thomas Morgenstern <webmaster@img2ms.de> Gesendet: Freitag, 22. Dezember 2017 10:33:34 An: Development list for mkgmap Betreff: Re: [mkgmap-dev] mkgmap r4010 Hi , which hgt will mkgmap use, if multipath for hgt is definied and in both paths are the same areas?. which hgt-file is used? The first found and the second is ignored? Or the second is used?. Thomas -------------------------------------------------- Von: "Gerd Petermann" <gpetermann_muenchen@hotmail.com> Datum: Freitag, 22. Dezember 2017 07:56 An: "Development list for mkgmap" <mkgmap-dev@lists.mkgmap.org.uk> Betreff: Re: [mkgmap-dev] mkgmap r4010
Hi Nick,
sure, look at the bottom of http://www.mkgmap.org.uk/download/mkgmap.html to find the latest branch builds.
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von garmin tools <osm@pinns.co.uk> Gesendet: Freitag, 22. Dezember 2017 08:38:15 An: mkgmap-dev@lists.mkgmap.org.uk Betreff: Re: [mkgmap-dev] mkgmap r4010
Hi Gerd
Would it be possible to have a compiled version of r4011 so I can do further testing?
Regards
Nick
On 22/12/2017 08:35, Gerd Petermann wrote:
Hi Arndt,
In r4011 you can specify multiple paths in a comma separated list.
Sample : --x-dem=f:\osm\phyghtmap\hgt\SRTM1,f:\osm\phyghtmap\hgt\SRTM3 If there are blanks in the path make sure to use quotes, e.g. (on Windows): --x-dem="f:\my owm data\phyghtmap\hgt\SRTM1","f:\my owm data\phyghtmap\hgt\SRTM3" Don't add blanks before or after the comma.
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von Gerd Petermann <gpetermann_muenchen@hotmail.com> Gesendet: Donnerstag, 21. Dezember 2017 20:33:32 An: Development list for mkgmap Betreff: Re: [mkgmap-dev] mkgmap r4010
Hi Arndt,
Good point. I think I can add code to search in multiple directories, for now you have to put them into one dir. Note that 1'' files and 3'' files have the same name, so if you want to use the 1'' files make sure that you don't replace them by 3'' files.
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von Arndt Röhrig <arndt@speichenkarte.de> Gesendet: Donnerstag, 21. Dezember 2017 20:00:44 An: Development list for mkgmap Betreff: Re: [mkgmap-dev] mkgmap r4010
Hi,
This is fantastic, thank you for this work!
I don´t understand anything what you do, but it works and my maps looks much better.
I use phyghtmap to get the hgt Files. phyghtmap stores the files in 4 folders, view3, view1, srtm3 and srtm1. Can i tell x-dem to look in all 4 folders? Or must i copy all hgts in one folder?
Arndt
Gerd Petermann hat am 21. Dezember 2017 um 18:10 geschrieben:
Hi,
I've just committed r4010. I think I found the bug that caused the wrong reliefs or empty rectangles. Next step is to calculate multiple levels.
@Frank: I forgot to make the number of zero bits depended on the previously calculated plateau length. The corresponding code in your program if (iPlateauLengthBinBits >= 0) // bei Plateaufollower weniger Bit erlaubt lbits -= iPlateauLengthBinBits + 1;
I think that this makes only sense if a BigBin value changes something, e.g. resets a flag or increases/decreases a counter. Else it would just be a waste of space. I think you mentioned something like that in the pdf as well.
Gerd _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap<mailto:mkgmap-dev@lists.mkgmap>.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
participants (6)
-
Arndt Röhrig -
garmin tools -
Gerd Petermann -
Gerd Petermann
-
Henning Scholland -
Thomas Morgenstern