- mkgmap-dev - The mkgmap lists

internal error: found no housenumber road
by Carlos Dávila 02 Mar '21

02 Mar '21

While processing Australia I get several warnings of the form: SEVERE (HousenumberGenerator): 51690125.o5m: internal error: found no housenumber road for interpolated house http://www.openstreetmap.org/?mlat=-37.782001&mlon=144.959382&zoom=17 Looking at that area in JOSM, I see addr:interpolation lines next to a footway without a name, connecting houses with addr:street=Royal Parede, and a primary road named Royal Parede some 20 m away from the addr:interpolation lines. I guess mkgmap searches for street name in the footway (which doesn't have a name) instead of in the Royal Parade road, and thus it fails to assign housenumbers.

3 12

Commit r4605: fix special case with addr:interpolation ways that span multiple MapRoad instances that caused "internal error: found no housenumber road for interpolated house" messages
by svn commit 02 Mar '21

02 Mar '21

Version mkgmap-r4605 was committed by gerd on Tue, 02 Mar 2021 fix special case with addr:interpolation ways that span multiple MapRoad instances that caused "internal error: found no housenumber road for interpolated house" messages - don't remove possible alternative roads too early - remove confusing info log message "housenumber is assigned to different road after checking addr:interpolation way which turned out to be invalid". It was only printed for housenumbers which were marked to be ignored http://www.mkgmap.org.uk/websvn/revision.php?repname=mkgmap&rev=4605

1 0

levels priority
by Vuki 01 Mar '21

01 Mar '21

Hello Guys, what is the priority of style/options and mkgmap command line "level" option, which is overriding the other? Br, Vuki

2 1

Error writing overviewmap - continue at failure
by Joris Bo 01 Mar '21

01 Mar '21

Hi, I think the below error message is for writing the overview map. Of which I would not be surprised, it was a test on splitting and building a full-planet.osm map. So... no worries. But now I'm wondering if there is a way in which I could continue testing with the already generated 4.426 img-files and 4.426 ovm_work files to obtain a .tdb file, mdx files, nsis installer etc. It took 21 hours for mkgmap sofar, so it would be nice if that time spent was not useless. I used splitter with maxnodes 1.700.000 which took another 9 hours and did not give errors when building a single .img file I would like to simplify the style-file run mkgmap again on the previous output and try the create an overview map only (So without building all the img files again) and this way iterate until I found the breakpoint. 1. Would that make sense? 2. Could I enable some more error/verbose logging to obtain info about sizes/counts or whatever indicators that would help to see if my changes help in my search to a smaller overviewmap. 3. Would It make sense to not generate a MapFailedException but a warning only? So mkgmap would continue finishing the last millimeters to the finish (off course without a working overviewmap) Kind regards Joris SEVERE (MapFailedException): (thrown in BufferedImgFileWriter.ensureSize()) There is not enough room in a single garmin map for all the input data. The .osm file should be split into smaller pieces first. uk.me.parabola.imgfmt.MapFailedException: There is not enough room in a single garmin map for all the input data. The .osm file should be split into smaller pieces first. at uk.me.parabola.imgfmt.app.BufferedImgFileWriter.ensureSize(BufferedImgFileWriter.java:275) at uk.me.parabola.imgfmt.app.BufferedImgFileWriter.put(BufferedImgFileWriter.java:238) at uk.me.parabola.imgfmt.app.trergn.Polyline.write(Polyline.java:142) at uk.me.parabola.imgfmt.app.trergn.RGNFile.addMapObject(RGNFile.java:140) at uk.me.parabola.imgfmt.app.map.Map.addMapObject(Map.java:273) at uk.me.parabola.mkgmap.build.MapBuilder$ShapeAddFilter.doFilter(MapBuilder.java:1459) at uk.me.parabola.mkgmap.build.LayerFilterChain.doFilter(LayerFilterChain.java:58) at uk.me.parabola.mkgmap.filters.LinePreparerFilter.doFilter(LinePreparerFilter.java:143) at uk.me.parabola.mkgmap.build.LayerFilterChain.doFilter(LayerFilterChain.java:58) at uk.me.parabola.mkgmap.filters.RemoveEmpty.doFilter(RemoveEmpty.java:59) at uk.me.parabola.mkgmap.build.LayerFilterChain.doFilter(LayerFilterChain.java:58) at uk.me.parabola.mkgmap.filters.RemoveObsoletePointsFilter.doFilter(RemoveObsoletePointsFilter.java:142) at uk.me.parabola.mkgmap.build.LayerFilterChain.doFilter(LayerFilterChain.java:58) at uk.me.parabola.mkgmap.filters.PolygonSplitterFilter.doFilter(PolygonSplitterFilter.java:81) at uk.me.parabola.mkgmap.build.LayerFilterChain.doFilter(LayerFilterChain.java:58) at uk.me.parabola.mkgmap.build.LayerFilterChain.startFilter(LayerFilterChain.java:73) at uk.me.parabola.mkgmap.build.MapBuilder.processShapes(MapBuilder.java:1260) at uk.me.parabola.mkgmap.build.MapBuilder.makeSubdivision(MapBuilder.java:901) at uk.me.parabola.mkgmap.build.MapBuilder.makeMapAreas(MapBuilder.java:813) at uk.me.parabola.mkgmap.build.MapBuilder.makeMap(MapBuilder.java:312) at uk.me.parabola.mkgmap.combiners.OverviewBuilder.writeOverviewMap(OverviewBuilder.java:192) at uk.me.parabola.mkgmap.combiners.OverviewBuilder.onFinish(OverviewBuilder.java:105) at uk.me.parabola.mkgmap.main.Main.endOptions(Main.java:675) at uk.me.parabola.mkgmap.CommandArgsReader.readArgs(CommandArgsReader.java:125) at uk.me.parabola.mkgmap.main.Main.mainStart(Main.java:144) at uk.me.parabola.mkgmap.main.Main.main(Main.java:115) Met vriendelijke groeten, Joris Bo jorisbo(a)hotmail.com<mailto:jorisbo@hotmail.com>

5 11

Commit r4604: minor changes
by svn commit 28 Feb '21

28 Feb '21

Version mkgmap-r4604 was committed by gerd on Sun, 28 Feb 2021 minor changes - remove unused parameter - report the house number in error message "internal error: found no housenumber road for interpolated house" http://www.mkgmap.org.uk/websvn/revision.php?repname=mkgmap&rev=4604

1 0

Commit r4603: Improve documentation (docsections2.patch by Mike Baggaley)
by svn commit 25 Feb '21

25 Feb '21

Version mkgmap-r4603 was committed by gerd on Thu, 25 Feb 2021 Improve documentation (docsections2.patch by Mike Baggaley) - Add new sections "Diagnostic options" and "POI options" http://www.mkgmap.org.uk/websvn/revision.php?repname=mkgmap&rev=4603

1 0

minor documentation improvement
by Mike Baggaley 24 Feb '21

24 Feb '21

Hi Gerd, Please find attached a patch to move some of the miscellaneous options into new sections Error checking options and POI options. There is no change to any of the actual wording. Cheers, Mike

2 3

is_in with own Tags?
by jan meisters 23 Feb '21

23 Feb '21

Hi all, I try to use is_in to fetch pois inside own invented tags, e.g.: leisure=park {add processed=yes} [0x2c06 resolution 24 continue with_actions] leisure=swimming_pool & is_in(processed,yes,in_or_on)=true {delete leisure} This fails, however „is_in(leisure,park,in_or_on)=true“ works in the example. Could someone explain where I´m wrong? Thanks Jan

4 12

Commit r4602: Improve documentation (seadoc2.patch by Mike Baggaley)
by svn commit 21 Feb '21

21 Feb '21

Version mkgmap-r4602 was committed by gerd on Sun, 21 Feb 2021 Improve documentation (seadoc2.patch by Mike Baggaley) http://www.mkgmap.org.uk/websvn/revision.php?repname=mkgmap&rev=4602

1 0

using mkgmap:admin_level2 in polygons
by Ranko Jaksic 19 Feb '21

19 Feb '21

Hi, I wanted to "display" counties using invisible polygons (so names are displayed when hovering in BC or GPSr). It is a multi-country map and county definitions differ from country to country so I tried using mkgmap:country (mkgmap:admin_level2). In the style manual mkgmap:admin_level2 is defined as "Name of the boundary=administrative relation/polygon with admin_level=2 the element is located in" However, when I used the following rule in my style polygons file some counties were skipped: mkgmap:admin_level2=HRV & boundary=administrative & admin_level=6 & name=* [0x16 resolution 14] Using echotags I found that mkgmap:admin_level2 was set. However, some of the counties had it set to neighbouring country codes (SVN, BIH, SRB) and didn't pass. Example county: https://www.openstreetmap.org/relation/226749 Actually, splitter splits the map into more then one tile, so the county gets split too. In some of the tiles mkgmap:admin_level2 gets set to HRV (as expected), but in others it is set to BIH I used the latest bounds file (20210212) and a custom OSM-map area, but the same happened when testing with croatia-latest.osm.pbf What am I missing? regards, Ranko

2 2