Commit: r2658: Use mkgmap:street tag to get street name for house number search
Version 2658 was committed by wanmil on Wed, 17 Jul 2013 Use mkgmap:street tag to get street name for house number search The house number matching algorithm now checks the mkgmap:street tag on roads. If it is set it uses it to match to the addr:street tags of house number elements. This enables style developers to put refs and other infos into the street name and at the same time have a good matching for house number search.
thanks for that solution. However the performance impact is quite tremendous. E.g. on Austria I have without it 2:55 (min/sec). By adding the line: highway=* & name=* {set mkgmap:street='${name}'} at the beginning of my lines file (or better, latest possibility before name changes). the time increases to about 3:45. I have tested the time impact several times - no changes >1sec... That's about a 25% increase in rendering time on mkgmap.jar. The solution is probably to only set mkgmap:street only for name changes - which will require quite a lot of additional code - at least for me. I will try and report probably next week.... (so for every set name=... - run { addmkgmap:street {$name}; set name=..... } hope this works and doesn't need to be put one line earlier ) or any easy optimization solution that doesn't need such a big name=* search? On 17.07.2013 21:10, svn commit wrote:
Version 2658 was committed by wanmil on Wed, 17 Jul 2013
Use mkgmap:street tag to get street name for house number search
The house number matching algorithm now checks the mkgmap:street tag on roads. If it is set it uses it to match to the addr:street tags of house number elements. This enables style developers to put refs and other infos into the street name and at the same time have a good matching for house number search. _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://lists.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
-- keep on biking and discovering new trails Felix openmtbmap.org & www.velomap.org
oh, found out that: name=* {set mkgmap:street='${name}'} doesn't have any performance impact. Dunno why this is so much quicker.... but it works. So it's good and documented here for everyone wondering how to use mkgmap:street. On 19.07.2013 17:28, Felix Hartmann wrote:
thanks for that solution. However the performance impact is quite tremendous. E.g. on Austria I have without it 2:55 (min/sec). By adding the line: highway=* & name=* {set mkgmap:street='${name}'} at the beginning of my lines file (or better, latest possibility before name changes). the time increases to about 3:45. I have tested the time impact several times - no changes >1sec...
That's about a 25% increase in rendering time on mkgmap.jar.
The solution is probably to only set mkgmap:street only for name changes - which will require quite a lot of additional code - at least for me. I will try and report probably next week.... (so for every set name=... - run { addmkgmap:street {$name}; set name=..... } hope this works and doesn't need to be put one line earlier ) or any easy optimization solution that doesn't need such a big name=* search? On 17.07.2013 21:10, svn commit wrote:
Version 2658 was committed by wanmil on Wed, 17 Jul 2013
Use mkgmap:street tag to get street name for house number search
The house number matching algorithm now checks the mkgmap:street tag on roads. If it is set it uses it to match to the addr:street tags of house number elements. This enables style developers to put refs and other infos into the street name and at the same time have a good matching for house number search. _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://lists.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
-- keep on biking and discovering new trails Felix openmtbmap.org & www.velomap.org
Actually neither of the two lines works!!!! Have I understood wrong how it should work? name=* {set mkgmap:street='${name}'} as first line in my lines file, doesn't help. I still get all the added "junk" like refs or route names and so on in the address search (used mapsource to try it out)... highway=* & name=* {set mkgmap:street='${name}'} also has no effect at all on the address search. where is my error? On 19.07.2013 17:30, Felix Hartmann wrote:
oh, found out that: name=* {set mkgmap:street='${name}'}
doesn't have any performance impact. Dunno why this is so much quicker.... but it works. So it's good and documented here for everyone wondering how to use mkgmap:street. On 19.07.2013 17:28, Felix Hartmann wrote:
thanks for that solution. However the performance impact is quite tremendous. E.g. on Austria I have without it 2:55 (min/sec). By adding the line: highway=* & name=* {set mkgmap:street='${name}'} at the beginning of my lines file (or better, latest possibility before name changes). the time increases to about 3:45. I have tested the time impact several times - no changes >1sec...
That's about a 25% increase in rendering time on mkgmap.jar.
The solution is probably to only set mkgmap:street only for name changes - which will require quite a lot of additional code - at least for me. I will try and report probably next week.... (so for every set name=... - run { addmkgmap:street {$name}; set name=..... } hope this works and doesn't need to be put one line earlier ) or any easy optimization solution that doesn't need such a big name=* search? On 17.07.2013 21:10, svn commit wrote:
Version 2658 was committed by wanmil on Wed, 17 Jul 2013
Use mkgmap:street tag to get street name for house number search
The house number matching algorithm now checks the mkgmap:street tag on roads. If it is set it uses it to match to the addr:street tags of house number elements. This enables style developers to put refs and other infos into the street name and at the same time have a good matching for house number search. _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://lists.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
-- keep on biking and discovering new trails Felix openmtbmap.org & www.velomap.org
On Fri, Jul 19, Felix Hartmann wrote:
Actually neither of the two lines works!!!!
Have I understood wrong how it should work? name=* {set mkgmap:street='${name}'} as first line in my lines file, doesn't help. I still get all the added "junk" like refs or route names and so on in the address search (used mapsource to try it out)... highway=* & name=* {set mkgmap:street='${name}'} also has no effect at all on the address search.
where is my error?
As far as I understood, mkgmap:street is used to match the housenumbers to streets (if you modify name, addr:streetname will no longer match). It's not used for the address index. Thorsten
On 19.07.2013 17:30, Felix Hartmann wrote:
oh, found out that: name=* {set mkgmap:street='${name}'}
doesn't have any performance impact. Dunno why this is so much quicker.... but it works. So it's good and documented here for everyone wondering how to use mkgmap:street. On 19.07.2013 17:28, Felix Hartmann wrote:
thanks for that solution. However the performance impact is quite tremendous. E.g. on Austria I have without it 2:55 (min/sec). By adding the line: highway=* & name=* {set mkgmap:street='${name}'} at the beginning of my lines file (or better, latest possibility before name changes). the time increases to about 3:45. I have tested the time impact several times - no changes >1sec...
That's about a 25% increase in rendering time on mkgmap.jar.
The solution is probably to only set mkgmap:street only for name changes - which will require quite a lot of additional code - at least for me. I will try and report probably next week.... (so for every set name=... - run { addmkgmap:street {$name}; set name=..... } hope this works and doesn't need to be put one line earlier ) or any easy optimization solution that doesn't need such a big name=* search? On 17.07.2013 21:10, svn commit wrote:
Version 2658 was committed by wanmil on Wed, 17 Jul 2013
Use mkgmap:street tag to get street name for house number search
The house number matching algorithm now checks the mkgmap:street tag on roads. If it is set it uses it to match to the addr:street tags of house number elements. This enables style developers to put refs and other infos into the street name and at the same time have a good matching for house number search. _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://lists.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
-- keep on biking and discovering new trails
Felix openmtbmap.org & www.velomap.org
_______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://lists.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
-- Thorsten Kukuk, Senior Architect SLES & Common Code Base SUSE LINUX Products GmbH, Maxfeldstr. 5, D-90409 Nuernberg GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer, HRB 16746 (AG Nürnberg)
El 19/07/13 18:19, Thorsten Kukuk escribió:
On Fri, Jul 19, Felix Hartmann wrote:
Actually neither of the two lines works!!!!
Have I understood wrong how it should work? name=* {set mkgmap:street='${name}'} as first line in my lines file, doesn't help. I still get all the added "junk" like refs or route names and so on in the address search (used mapsource to try it out)... highway=* & name=* {set mkgmap:street='${name}'} also has no effect at all on the address search.
where is my error? As far as I understood, mkgmap:street is used to match the housenumbers to streets (if you modify name, addr:streetname will no longer match). It's not used for the address index. House number search should work together with address search. I also tried r2658 but could not find house numbers.
Thorsten
On 19.07.2013 17:30, Felix Hartmann wrote:
oh, found out that: name=* {set mkgmap:street='${name}'}
doesn't have any performance impact. Dunno why this is so much quicker.... but it works. So it's good and documented here for everyone wondering how to use mkgmap:street. On 19.07.2013 17:28, Felix Hartmann wrote:
thanks for that solution. However the performance impact is quite tremendous. E.g. on Austria I have without it 2:55 (min/sec). By adding the line: highway=* & name=* {set mkgmap:street='${name}'} at the beginning of my lines file (or better, latest possibility before name changes). the time increases to about 3:45. I have tested the time impact several times - no changes >1sec...
That's about a 25% increase in rendering time on mkgmap.jar.
The solution is probably to only set mkgmap:street only for name changes - which will require quite a lot of additional code - at least for me. I will try and report probably next week.... (so for every set name=... - run { addmkgmap:street {$name}; set name=..... } hope this works and doesn't need to be put one line earlier ) or any easy optimization solution that doesn't need such a big name=* search? On 17.07.2013 21:10, svn commit wrote:
Version 2658 was committed by wanmil on Wed, 17 Jul 2013
Use mkgmap:street tag to get street name for house number search
The house number matching algorithm now checks the mkgmap:street tag on roads. If it is set it uses it to match to the addr:street tags of house number elements. This enables style developers to put refs and other infos into the street name and at the same time have a good matching for house number search. _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://lists.mkgmap.org.uk/mailman/listinfo/mkgmap-dev -- keep on biking and discovering new trails
Felix openmtbmap.org & www.velomap.org
_______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://lists.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
-- Por favor, no me envíe documentos con extensiones .doc, .docx, .xls, .xlsx, .ppt, .pptx, .mdb, mdbx Instale LibreOffice desde http://es.libreoffice.org/descarga/ LibreOffice es libre: se puede copiar, modificar y redistribuir libremente. Gratis y totalmente legal. LibreOffice está en continuo desarrollo y no tendrá que pagar por las nuevas versiones.
El 19/07/13 18:52, Carlos Dávila escribió:
El 19/07/13 18:19, Thorsten Kukuk escribió:
On Fri, Jul 19, Felix Hartmann wrote:
Actually neither of the two lines works!!!!
Have I understood wrong how it should work? name=* {set mkgmap:street='${name}'} as first line in my lines file, doesn't help. I still get all the added "junk" like refs or route names and so on in the address search (used mapsource to try it out)... highway=* & name=* {set mkgmap:street='${name}'} also has no effect at all on the address search.
where is my error? As far as I understood, mkgmap:street is used to match the housenumbers to streets (if you modify name, addr:streetname will no longer match). It's not used for the address index. House number search should work together with address search. I also tried r2658 but could not find house numbers. Well, I don't know what was doing wrong, but now it works. I can find house numbers even in streets I have changed the name via style. Thorsten
On 19.07.2013 17:30, Felix Hartmann wrote:
oh, found out that: name=* {set mkgmap:street='${name}'}
doesn't have any performance impact. Dunno why this is so much quicker.... but it works. So it's good and documented here for everyone wondering how to use mkgmap:street. On 19.07.2013 17:28, Felix Hartmann wrote:
thanks for that solution. However the performance impact is quite tremendous. E.g. on Austria I have without it 2:55 (min/sec). By adding the line: highway=* & name=* {set mkgmap:street='${name}'} at the beginning of my lines file (or better, latest possibility before name changes). the time increases to about 3:45. I have tested the time impact several times - no changes >1sec...
That's about a 25% increase in rendering time on mkgmap.jar.
The solution is probably to only set mkgmap:street only for name changes - which will require quite a lot of additional code - at least for me. I will try and report probably next week.... (so for every set name=... - run { addmkgmap:street {$name}; set name=..... } hope this works and doesn't need to be put one line earlier ) or any easy optimization solution that doesn't need such a big name=* search? On 17.07.2013 21:10, svn commit wrote:
Version 2658 was committed by wanmil on Wed, 17 Jul 2013
Use mkgmap:street tag to get street name for house number search
The house number matching algorithm now checks the mkgmap:street tag on roads. If it is set it uses it to match to the addr:street tags of house number elements. This enables style developers to put refs and other infos into the street name and at the same time have a good matching for house number search. _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://lists.mkgmap.org.uk/mailman/listinfo/mkgmap-dev -- keep on biking and discovering new trails
Felix openmtbmap.org & www.velomap.org
_______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://lists.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
participants (4)
-
Carlos Dávila -
Felix Hartmann -
svn commit -
Thorsten Kukuk