Hi may be that somebody has an idea why the routing of my gpsmap 276Cx is so crude. I'm using almost the standard style to build my own garmin maps. And as the example is mostly in the vicinity of my hometown,i had not experienced this error before, as i need not a gps in my home area. If you look at picture 20190924_173131.jpg this is a routing i would expect to the destination, short and fast. If you look at 20190924_173229.jpg, the destination is only a few meters away from the first one, the routing is nearly three times more than before with the same settings on my device. I would appreciate any advice what to change or any hint where i can look for why this could happen. Btw, if i change the setting to use bicycle routing, the device will use for both destinations the expected way -- ##################################################### Viele Grüße und 73 de Manfred Haiduk, DD8KQ e-mail mhaiduk@t-online.de dd8kq@gmx.de #####################################################
Hi The Tertiary road has an incline of -12 degrees. Perhaps it's avoiding steep hills? Regards Nick On 24/09/2019 20:58, DD8KQ wrote:
Hi
may be that somebody has an idea why the routing of my gpsmap 276Cx is so crude. I'm using almost the standard style to build my own garmin maps. And as the example is mostly in the vicinity of my hometown,i had not experienced this error before, as i need not a gps in my home area. If you look at picture 20190924_173131.jpg this is a routing i would expect to the destination, short and fast. If you look at 20190924_173229.jpg, the destination is only a few meters away from the first one, the routing is nearly three times more than before with the same settings on my device. I would appreciate any advice what to change or any hint where i can look for why this could happen.
Btw, if i change the setting to use bicycle routing, the device will use for both destinations the expected way
--
#####################################################
Viele Grüße und 73 de Manfred Haiduk, DD8KQ e-mail mhaiduk@t-online.de dd8kq@gmx.de
#####################################################
_______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
Hi Manfred, No idea. I cannot reproduce the result with the default style in Mapsource. I tried with vehicle car as well as with cycling or pedestrian, I never get the long detour. Can you reproduce it with Mapsource? If yes, please provide more details about the routing settings. ________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von DD8KQ <dd8kq@gmx.de> Gesendet: Dienstag, 24. September 2019 21:58 An: Development list for mkgmap Betreff: [mkgmap-dev] crude routing of my gpsmap 276Cx Hi may be that somebody has an idea why the routing of my gpsmap 276Cx is so crude. I'm using almost the standard style to build my own garmin maps. And as the example is mostly in the vicinity of my hometown,i had not experienced this error before, as i need not a gps in my home area. If you look at picture 20190924_173131.jpg this is a routing i would expect to the destination, short and fast. If you look at 20190924_173229.jpg, the destination is only a few meters away from the first one, the routing is nearly three times more than before with the same settings on my device. I would appreciate any advice what to change or any hint where i can look for why this could happen. Btw, if i change the setting to use bicycle routing, the device will use for both destinations the expected way -- ##################################################### Viele Grüße und 73 de Manfred Haiduk, DD8KQ e-mail mhaiduk@t-online.de dd8kq@gmx.de #####################################################
Hi Gerd it's really weird. Trying this with MapSource you are right, there is no long detour. But, then, i tried the same with BaseCamp and you know what, BaseCamp produced on my Laptop this detour, see attached picture Test2. And just for testing, i tried the same area on a Smartfone running the Navigator App with OSM maps, and this progromm is routing the same detour, see picture screenshot. So for me there must be something in the OSM Source regarding the street K30 which will cause the strange routing. But my experience is too small to figure it out Am 25.09.2019 um 11:12 schrieb Gerd Petermann:
Hi Manfred,
No idea. I cannot reproduce the result with the default style in Mapsource. I tried with vehicle car as well as with cycling or pedestrian, I never get the long detour. Can you reproduce it with Mapsource? If yes, please provide more details about the routing settings.
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von DD8KQ <dd8kq@gmx.de> Gesendet: Dienstag, 24. September 2019 21:58 An: Development list for mkgmap Betreff: [mkgmap-dev] crude routing of my gpsmap 276Cx
Hi
may be that somebody has an idea why the routing of my gpsmap 276Cx is so crude. I'm using almost the standard style to build my own garmin maps. And as the example is mostly in the vicinity of my hometown,i had not experienced this error before, as i need not a gps in my home area. If you look at picture 20190924_173131.jpg this is a routing i would expect to the destination, short and fast. If you look at 20190924_173229.jpg, the destination is only a few meters away from the first one, the routing is nearly three times more than before with the same settings on my device. I would appreciate any advice what to change or any hint where i can look for why this could happen.
Btw, if i change the setting to use bicycle routing, the device will use for both destinations the expected way
--
#####################################################
Viele Grüße und 73 de Manfred Haiduk, DD8KQ e-mail mhaiduk@t-online.de dd8kq@gmx.de
#####################################################
_______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
-- ##################################################### Viele Grüße und 73 de Manfred Haiduk, DD8KQ e-mail mhaiduk@t-online.de dd8kq@gmx.de #####################################################
Hi Manfred, I tried to reproduce your results with BC but I get a different route. at the moment I wonder why Mapsource shows the shorter route when using car/motorcycle. The ways https://www.openstreetmap.org/way/25285586 and https://www.openstreetmap.org/way/25285589 both have the tag access=destination, so my understanding is that cars should not be routed through them, but this seems to be ignored. I'll have to find out why. Gerd ________________________________________ Von: DD8KQ <dd8kq@gmx.de> Gesendet: Mittwoch, 25. September 2019 14:53 An: Development list for mkgmap; Gerd Petermann Betreff: Re: [mkgmap-dev] crude routing of my gpsmap 276Cx Hi Gerd it's really weird. Trying this with MapSource you are right, there is no long detour. But, then, i tried the same with BaseCamp and you know what, BaseCamp produced on my Laptop this detour, see attached picture Test2. And just for testing, i tried the same area on a Smartfone running the Navigator App with OSM maps, and this progromm is routing the same detour, see picture screenshot. So for me there must be something in the OSM Source regarding the street K30 which will cause the strange routing. But my experience is too small to figure it out Am 25.09.2019 um 11:12 schrieb Gerd Petermann:
Hi Manfred,
No idea. I cannot reproduce the result with the default style in Mapsource. I tried with vehicle car as well as with cycling or pedestrian, I never get the long detour. Can you reproduce it with Mapsource? If yes, please provide more details about the routing settings.
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von DD8KQ <dd8kq@gmx.de> Gesendet: Dienstag, 24. September 2019 21:58 An: Development list for mkgmap Betreff: [mkgmap-dev] crude routing of my gpsmap 276Cx
Hi
may be that somebody has an idea why the routing of my gpsmap 276Cx is so crude. I'm using almost the standard style to build my own garmin maps. And as the example is mostly in the vicinity of my hometown,i had not experienced this error before, as i need not a gps in my home area. If you look at picture 20190924_173131.jpg this is a routing i would expect to the destination, short and fast. If you look at 20190924_173229.jpg, the destination is only a few meters away from the first one, the routing is nearly three times more than before with the same settings on my device. I would appreciate any advice what to change or any hint where i can look for why this could happen.
Btw, if i change the setting to use bicycle routing, the device will use for both destinations the expected way
--
#####################################################
Viele Grüße und 73 de Manfred Haiduk, DD8KQ e-mail mhaiduk@t-online.de dd8kq@gmx.de
#####################################################
_______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
-- ##################################################### Viele Grüße und 73 de Manfred Haiduk, DD8KQ e-mail mhaiduk@t-online.de dd8kq@gmx.de #####################################################
participants (3)
-
DD8KQ -
Gerd Petermann -
Pinns UK