Hi all, attached is a patch that seems to help in many cases where --dem-poly causes crashes in MapSource "Show Profile..." A binary is here: http://files.mkgmap.org.uk/download/414/mkgmap.jar It changes the TRE file and the *.tdb file. I still see a few crashes but maybe those are caused by other problems. Please try and let me know your results. I found no bad impact so far, long distance routing still seems to work, but I've not tested much. @Steve: Maybe we have to make sure that the areas in *.tdb do not overlap. In this case this patch is not yet okay. Gerd
Hi Gerd, I tested your patch but I still see frequent crashes near tile borders. ________________________________ Van: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> namens Gerd Petermann <GPetermann_muenchen@hotmail.com> Verzonden: woensdag 7 februari 2018 02:45:27 Aan: mkgmap-dev@lists.mkgmap.org.uk Onderwerp: [mkgmap-dev] patch for crash in MapSource Hi all, attached is a patch that seems to help in many cases where --dem-poly causes crashes in MapSource "Show Profile..." A binary is here: http://files.mkgmap.org.uk/download/414/mkgmap.jar It changes the TRE file and the *.tdb file. I still see a few crashes but maybe those are caused by other problems. Please try and let me know your results. I found no bad impact so far, long distance routing still seems to work, but I've not tested much. @Steve: Maybe we have to make sure that the areas in *.tdb do not overlap. In this case this patch is not yet okay. Gerd
Same for me, but just did quick test. Will try on the weekend more detailed Henning On 8 Feb 2018, 16:57, at 16:57, lig fietser <ligfietser@hotmail.com> wrote:
Hi Gerd,
I tested your patch but I still see frequent crashes near tile borders.
________________________________ Van: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> namens Gerd Petermann <GPetermann_muenchen@hotmail.com> Verzonden: woensdag 7 februari 2018 02:45:27 Aan: mkgmap-dev@lists.mkgmap.org.uk Onderwerp: [mkgmap-dev] patch for crash in MapSource
Hi all,
attached is a patch that seems to help in many cases where --dem-poly causes crashes in MapSource "Show Profile..." A binary is here: http://files.mkgmap.org.uk/download/414/mkgmap.jar
It changes the TRE file and the *.tdb file. I still see a few crashes but maybe those are caused by other problems.
Please try and let me know your results. I found no bad impact so far, long distance routing still seems to work, but I've not tested much.
@Steve: Maybe we have to make sure that the areas in *.tdb do not overlap. In this case this patch is not yet okay.
Gerd
------------------------------------------------------------------------
_______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
Hi all, okay, thanks for testing. I'll try to find a better patch. Please check: I think the patch works fine for routes which cross tile borders in horizontal direction direction but I still see problems with vertical crossing. Can you confirm that? Gerd ________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von Henning Scholland <osm@hscholland.de> Gesendet: Donnerstag, 8. Februar 2018 09:59 An: Development list for mkgmap Betreff: Re: [mkgmap-dev] patch for crash in MapSource Same for me, but just did quick test. Will try on the weekend more detailed Henning On 8 Feb 2018, at 16:57, lig fietser <ligfietser@hotmail.com<mailto:ligfietser@hotmail.com>> wrote: Hi Gerd, I tested your patch but I still see frequent crashes near tile borders. ________________________________ Van: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> namens Gerd Petermann <GPetermann_muenchen@hotmail.com> Verzonden: woensdag 7 februari 2018 02:45:27 Aan: mkgmap-dev@lists.mkgmap.org.uk Onderwerp: [mkgmap-dev] patch for crash in MapSource Hi all, attached is a patch that seems to help in many cases where --dem-poly causes crashes in MapSource "Show Profile..." A binary is here: http://files.mkgmap.org.uk/download/414/mkgmap.jar It changes the TRE file and the *.tdb file. I still see a few crashes but maybe those are caused by other problems. Please try and let me know your results. I found no bad impact so far, long distance routing still seems to work, but I've not tested much. @Steve: Maybe we have to make sure that the areas in *.tdb do not overlap. In this case this patch is not yet okay. Gerd ________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
Hi Gerd I think you are right ,ie start and finishing point at same level seems OK eventhough the route turns south 20miles then up again r Nick On 08/02/2018 09:27, Gerd Petermann wrote:
Hi all,
okay, thanks for testing. I'll try to find a better patch. Please check: I think the patch works fine for routes which cross tile borders in horizontal direction direction but I still see problems with vertical crossing. Can you confirm that?
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von Henning Scholland <osm@hscholland.de> Gesendet: Donnerstag, 8. Februar 2018 09:59 An: Development list for mkgmap Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Same for me, but just did quick test. Will try on the weekend more detailed Henning On 8 Feb 2018, at 16:57, lig fietser <ligfietser@hotmail.com<mailto:ligfietser@hotmail.com>> wrote:
Hi Gerd,
I tested your patch but I still see frequent crashes near tile borders.
________________________________ Van: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> namens Gerd Petermann <GPetermann_muenchen@hotmail.com> Verzonden: woensdag 7 februari 2018 02:45:27 Aan: mkgmap-dev@lists.mkgmap.org.uk Onderwerp: [mkgmap-dev] patch for crash in MapSource
Hi all,
attached is a patch that seems to help in many cases where --dem-poly causes crashes in MapSource "Show Profile..." A binary is here: http://files.mkgmap.org.uk/download/414/mkgmap.jar
It changes the TRE file and the *.tdb file. I still see a few crashes but maybe those are caused by other problems.
Please try and let me know your results. I found no bad impact so far, long distance routing still seems to work, but I've not tested much.
@Steve: Maybe we have to make sure that the areas in *.tdb do not overlap. In this case this patch is not yet okay.
Gerd
________________________________
mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
Hi all, the patch contained a stupid bug, but there is more to this: 1) the effect of the patch depends on the dem-dists value (I assume only the one that gives the highest resolution). The higher the resolution the better it works. 2) it probably also depends on the boundaries (areas.list) I assume now that the tile boundary from areas.list should be a certain multiples of degrees, probably different multiples for lat and lon and that the overlap simply makes sure that this boundary is within the overlapped area. Maybe the preferred multiples also depend on the dem-dist. I'll try to find out more ... Gerd ________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von osm@pinns <osm@pinns.co.uk> Gesendet: Donnerstag, 8. Februar 2018 10:33 An: mkgmap-dev@lists.mkgmap.org.uk Betreff: Re: [mkgmap-dev] patch for crash in MapSource Hi Gerd I think you are right ,ie start and finishing point at same level seems OK eventhough the route turns south 20miles then up again r Nick On 08/02/2018 09:27, Gerd Petermann wrote:
Hi all,
okay, thanks for testing. I'll try to find a better patch. Please check: I think the patch works fine for routes which cross tile borders in horizontal direction direction but I still see problems with vertical crossing. Can you confirm that?
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von Henning Scholland <osm@hscholland.de> Gesendet: Donnerstag, 8. Februar 2018 09:59 An: Development list for mkgmap Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Same for me, but just did quick test. Will try on the weekend more detailed Henning On 8 Feb 2018, at 16:57, lig fietser <ligfietser@hotmail.com<mailto:ligfietser@hotmail.com>> wrote:
Hi Gerd,
I tested your patch but I still see frequent crashes near tile borders.
________________________________ Van: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> namens Gerd Petermann <GPetermann_muenchen@hotmail.com> Verzonden: woensdag 7 februari 2018 02:45:27 Aan: mkgmap-dev@lists.mkgmap.org.uk Onderwerp: [mkgmap-dev] patch for crash in MapSource
Hi all,
attached is a patch that seems to help in many cases where --dem-poly causes crashes in MapSource "Show Profile..." A binary is here: http://files.mkgmap.org.uk/download/414/mkgmap.jar
It changes the TRE file and the *.tdb file. I still see a few crashes but maybe those are caused by other problems.
Please try and let me know your results. I found no bad impact so far, long distance routing still seems to work, but I've not tested much.
@Steve: Maybe we have to make sure that the areas in *.tdb do not overlap. In this case this patch is not yet okay.
Gerd
________________________________
mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
Hi all, I've created patches for splitter and mkgmap. The binaries are here: http://files.mkgmap.org.uk/download/417/splitter.jar http://files.mkgmap.org.uk/detail/416 Please try splitter with align-for-dem=360. I found no more crashes as long as used only one dem level, e.g. dem-dists=3312 or dem-dists=9936 Maybe you find a combination of align-for-dem and dem-dists with more than one value that still works, I'll try again tomorrow. Gerd ________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von Gerd Petermann <gpetermann_muenchen@hotmail.com> Gesendet: Donnerstag, 8. Februar 2018 13:16 An: Development list for mkgmap Betreff: Re: [mkgmap-dev] patch for crash in MapSource Hi all, the patch contained a stupid bug, but there is more to this: 1) the effect of the patch depends on the dem-dists value (I assume only the one that gives the highest resolution). The higher the resolution the better it works. 2) it probably also depends on the boundaries (areas.list) I assume now that the tile boundary from areas.list should be a certain multiples of degrees, probably different multiples for lat and lon and that the overlap simply makes sure that this boundary is within the overlapped area. Maybe the preferred multiples also depend on the dem-dist. I'll try to find out more ... Gerd ________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von osm@pinns <osm@pinns.co.uk> Gesendet: Donnerstag, 8. Februar 2018 10:33 An: mkgmap-dev@lists.mkgmap.org.uk Betreff: Re: [mkgmap-dev] patch for crash in MapSource Hi Gerd I think you are right ,ie start and finishing point at same level seems OK eventhough the route turns south 20miles then up again r Nick On 08/02/2018 09:27, Gerd Petermann wrote:
Hi all,
okay, thanks for testing. I'll try to find a better patch. Please check: I think the patch works fine for routes which cross tile borders in horizontal direction direction but I still see problems with vertical crossing. Can you confirm that?
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von Henning Scholland <osm@hscholland.de> Gesendet: Donnerstag, 8. Februar 2018 09:59 An: Development list for mkgmap Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Same for me, but just did quick test. Will try on the weekend more detailed Henning On 8 Feb 2018, at 16:57, lig fietser <ligfietser@hotmail.com<mailto:ligfietser@hotmail.com>> wrote:
Hi Gerd,
I tested your patch but I still see frequent crashes near tile borders.
________________________________ Van: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> namens Gerd Petermann <GPetermann_muenchen@hotmail.com> Verzonden: woensdag 7 februari 2018 02:45:27 Aan: mkgmap-dev@lists.mkgmap.org.uk Onderwerp: [mkgmap-dev] patch for crash in MapSource
Hi all,
attached is a patch that seems to help in many cases where --dem-poly causes crashes in MapSource "Show Profile..." A binary is here: http://files.mkgmap.org.uk/download/414/mkgmap.jar
It changes the TRE file and the *.tdb file. I still see a few crashes but maybe those are caused by other problems.
Please try and let me know your results. I found no bad impact so far, long distance routing still seems to work, but I've not tested much.
@Steve: Maybe we have to make sure that the areas in *.tdb do not overlap. In this case this patch is not yet okay.
Gerd
________________________________
mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
Hi Gerd Brilliant ! have done a really spaghetti route with lots of ups and downs left and right and seems to be working with align-for-dem=360 and even --dem-dists=2484,3312,9942,16560 r Nick On 08/02/2018 17:40, Gerd Petermann wrote:
Hi all,
I've created patches for splitter and mkgmap. The binaries are here: http://files.mkgmap.org.uk/download/417/splitter.jar http://files.mkgmap.org.uk/detail/416
Please try splitter with align-for-dem=360. I found no more crashes as long as used only one dem level, e.g. dem-dists=3312 or dem-dists=9936
Maybe you find a combination of align-for-dem and dem-dists with more than one value that still works, I'll try again tomorrow.
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von Gerd Petermann <gpetermann_muenchen@hotmail.com> Gesendet: Donnerstag, 8. Februar 2018 13:16 An: Development list for mkgmap Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Hi all,
the patch contained a stupid bug, but there is more to this: 1) the effect of the patch depends on the dem-dists value (I assume only the one that gives the highest resolution). The higher the resolution the better it works. 2) it probably also depends on the boundaries (areas.list)
I assume now that the tile boundary from areas.list should be a certain multiples of degrees, probably different multiples for lat and lon and that the overlap simply makes sure that this boundary is within the overlapped area. Maybe the preferred multiples also depend on the dem-dist.
I'll try to find out more ...
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von osm@pinns <osm@pinns.co.uk> Gesendet: Donnerstag, 8. Februar 2018 10:33 An: mkgmap-dev@lists.mkgmap.org.uk Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Hi Gerd
I think you are right ,ie
start and finishing point at same level seems OK eventhough the route turns south 20miles then up again
r
Nick
On 08/02/2018 09:27, Gerd Petermann wrote:
Hi all,
okay, thanks for testing. I'll try to find a better patch. Please check: I think the patch works fine for routes which cross tile borders in horizontal direction direction but I still see problems with vertical crossing. Can you confirm that?
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von Henning Scholland <osm@hscholland.de> Gesendet: Donnerstag, 8. Februar 2018 09:59 An: Development list for mkgmap Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Same for me, but just did quick test. Will try on the weekend more detailed Henning On 8 Feb 2018, at 16:57, lig fietser <ligfietser@hotmail.com<mailto:ligfietser@hotmail.com>> wrote:
Hi Gerd,
I tested your patch but I still see frequent crashes near tile borders.
________________________________ Van: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> namens Gerd Petermann <GPetermann_muenchen@hotmail.com> Verzonden: woensdag 7 februari 2018 02:45:27 Aan: mkgmap-dev@lists.mkgmap.org.uk Onderwerp: [mkgmap-dev] patch for crash in MapSource
Hi all,
attached is a patch that seems to help in many cases where --dem-poly causes crashes in MapSource "Show Profile..." A binary is here: http://files.mkgmap.org.uk/download/414/mkgmap.jar
It changes the TRE file and the *.tdb file. I still see a few crashes but maybe those are caused by other problems.
Please try and let me know your results. I found no bad impact so far, long distance routing still seems to work, but I've not tested much.
@Steve: Maybe we have to make sure that the areas in *.tdb do not overlap. In this case this patch is not yet okay.
Gerd
________________________________
mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
Hi Nick, great! In my test cases I found problems with long distance routes without any stopover. Please try that as well, maybe also the inverse routes. Gerd ________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von osm@pinns <osm@pinns.co.uk> Gesendet: Donnerstag, 8. Februar 2018 19:01 An: mkgmap-dev@lists.mkgmap.org.uk Betreff: Re: [mkgmap-dev] patch for crash in MapSource Hi Gerd Brilliant ! have done a really spaghetti route with lots of ups and downs left and right and seems to be working with align-for-dem=360 and even --dem-dists=2484,3312,9942,16560 r Nick On 08/02/2018 17:40, Gerd Petermann wrote: Hi all, I've created patches for splitter and mkgmap. The binaries are here: http://files.mkgmap.org.uk/download/417/splitter.jar http://files.mkgmap.org.uk/detail/416 Please try splitter with align-for-dem=360. I found no more crashes as long as used only one dem level, e.g. dem-dists=3312 or dem-dists=9936 Maybe you find a combination of align-for-dem and dem-dists with more than one value that still works, I'll try again tomorrow. Gerd ________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk><mailto:mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von Gerd Petermann <gpetermann_muenchen@hotmail.com><mailto:gpetermann_muenchen@hotmail.com> Gesendet: Donnerstag, 8. Februar 2018 13:16 An: Development list for mkgmap Betreff: Re: [mkgmap-dev] patch for crash in MapSource Hi all, the patch contained a stupid bug, but there is more to this: 1) the effect of the patch depends on the dem-dists value (I assume only the one that gives the highest resolution). The higher the resolution the better it works. 2) it probably also depends on the boundaries (areas.list) I assume now that the tile boundary from areas.list should be a certain multiples of degrees, probably different multiples for lat and lon and that the overlap simply makes sure that this boundary is within the overlapped area. Maybe the preferred multiples also depend on the dem-dist. I'll try to find out more ... Gerd ________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk><mailto:mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von osm@pinns <osm@pinns.co.uk><mailto:osm@pinns.co.uk> Gesendet: Donnerstag, 8. Februar 2018 10:33 An: mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> Betreff: Re: [mkgmap-dev] patch for crash in MapSource Hi Gerd I think you are right ,ie start and finishing point at same level seems OK eventhough the route turns south 20miles then up again r Nick On 08/02/2018 09:27, Gerd Petermann wrote: Hi all, okay, thanks for testing. I'll try to find a better patch. Please check: I think the patch works fine for routes which cross tile borders in horizontal direction direction but I still see problems with vertical crossing. Can you confirm that? Gerd ________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk><mailto:mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von Henning Scholland <osm@hscholland.de><mailto:osm@hscholland.de> Gesendet: Donnerstag, 8. Februar 2018 09:59 An: Development list for mkgmap Betreff: Re: [mkgmap-dev] patch for crash in MapSource Same for me, but just did quick test. Will try on the weekend more detailed Henning On 8 Feb 2018, at 16:57, lig fietser <ligfietser@hotmail.com<mailto:ligfietser@hotmail.com><mailto:ligfietser@hotmail.com><mailto:ligfietser@hotmail.com>> wrote: Hi Gerd, I tested your patch but I still see frequent crashes near tile borders. ________________________________ Van: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk><mailto:mkgmap-dev-bounces@lists.mkgmap.org.uk> namens Gerd Petermann <GPetermann_muenchen@hotmail.com><mailto:GPetermann_muenchen@hotmail.com> Verzonden: woensdag 7 februari 2018 02:45:27 Aan: mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> Onderwerp: [mkgmap-dev] patch for crash in MapSource Hi all, attached is a patch that seems to help in many cases where --dem-poly causes crashes in MapSource "Show Profile..." A binary is here: http://files.mkgmap.org.uk/download/414/mkgmap.jar It changes the TRE file and the *.tdb file. I still see a few crashes but maybe those are caused by other problems. Please try and let me know your results. I found no bad impact so far, long distance routing still seems to work, but I've not tested much. @Steve: Maybe we have to make sure that the areas in *.tdb do not overlap. In this case this patch is not yet okay. Gerd ________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
Hi Gerd, Having difficulty creating long distances without stopovers ikn Mapsource, but that seems have been the case anyway before dem, at least in my case using default style Have created a long distance one in Basecamp, exported it in Mapsource and absolutely no problem with creating profiles! Excellent work ! If I invert the route , ie in Basecamp, and export it in mapsource, same : no issues at all At one stage, I cannot reproduce it ,I just got a black profile, but that could be when I a dem was missing. On 08/02/2018 19:11, Gerd Petermann wrote:
Hi Nick,
great! In my test cases I found problems with long distance routes without any stopover. Please try that as well, maybe also the inverse routes.
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von osm@pinns <osm@pinns.co.uk> Gesendet: Donnerstag, 8. Februar 2018 19:01 An: mkgmap-dev@lists.mkgmap.org.uk Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Hi Gerd
Brilliant ! have done a really spaghetti route with lots of ups and downs left and right and
seems to be working with align-for-dem=360 and even
--dem-dists=2484,3312,9942,16560
r
Nick
On 08/02/2018 17:40, Gerd Petermann wrote:
Hi all,
I've created patches for splitter and mkgmap. The binaries are here: http://files.mkgmap.org.uk/download/417/splitter.jar http://files.mkgmap.org.uk/detail/416
Please try splitter with align-for-dem=360. I found no more crashes as long as used only one dem level, e.g. dem-dists=3312 or dem-dists=9936
Maybe you find a combination of align-for-dem and dem-dists with more than one value that still works, I'll try again tomorrow.
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk><mailto:mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von Gerd Petermann <gpetermann_muenchen@hotmail.com><mailto:gpetermann_muenchen@hotmail.com> Gesendet: Donnerstag, 8. Februar 2018 13:16 An: Development list for mkgmap Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Hi all,
the patch contained a stupid bug, but there is more to this: 1) the effect of the patch depends on the dem-dists value (I assume only the one that gives the highest resolution). The higher the resolution the better it works. 2) it probably also depends on the boundaries (areas.list)
I assume now that the tile boundary from areas.list should be a certain multiples of degrees, probably different multiples for lat and lon and that the overlap simply makes sure that this boundary is within the overlapped area. Maybe the preferred multiples also depend on the dem-dist.
I'll try to find out more ...
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk><mailto:mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von osm@pinns <osm@pinns.co.uk><mailto:osm@pinns.co.uk> Gesendet: Donnerstag, 8. Februar 2018 10:33 An: mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Hi Gerd
I think you are right ,ie
start and finishing point at same level seems OK eventhough the route turns south 20miles then up again
r
Nick
On 08/02/2018 09:27, Gerd Petermann wrote:
Hi all,
okay, thanks for testing. I'll try to find a better patch. Please check: I think the patch works fine for routes which cross tile borders in horizontal direction direction but I still see problems with vertical crossing. Can you confirm that?
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk><mailto:mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von Henning Scholland <osm@hscholland.de><mailto:osm@hscholland.de> Gesendet: Donnerstag, 8. Februar 2018 09:59 An: Development list for mkgmap Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Same for me, but just did quick test. Will try on the weekend more detailed Henning On 8 Feb 2018, at 16:57, lig fietser <ligfietser@hotmail.com<mailto:ligfietser@hotmail.com><mailto:ligfietser@hotmail.com><mailto:ligfietser@hotmail.com>> wrote:
Hi Gerd,
I tested your patch but I still see frequent crashes near tile borders.
________________________________ Van: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk><mailto:mkgmap-dev-bounces@lists.mkgmap.org.uk> namens Gerd Petermann <GPetermann_muenchen@hotmail.com><mailto:GPetermann_muenchen@hotmail.com> Verzonden: woensdag 7 februari 2018 02:45:27 Aan: mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> Onderwerp: [mkgmap-dev] patch for crash in MapSource
Hi all,
attached is a patch that seems to help in many cases where --dem-poly causes crashes in MapSource "Show Profile..." A binary is here: http://files.mkgmap.org.uk/download/414/mkgmap.jar
It changes the TRE file and the *.tdb file. I still see a few crashes but maybe those are caused by other problems.
Please try and let me know your results. I found no bad impact so far, long distance routing still seems to work, but I've not tested much.
@Steve: Maybe we have to make sure that the areas in *.tdb do not overlap. In this case this patch is not yet okay.
Gerd
________________________________
mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
Hi Nick, okay, sounds good. Do you also use -dem-poly or hgt files with voids? I tested a rather small polygon [1] divided into 10 parts, maybe that created more stress for MapSource. Maybe we can find other --align-for-dem values or -even better - a field in TRE or DEM or TDB that can be changed to allow more or all values. Gerd [1] http://files.mkgmap.org.uk/download/412/baddem6b.7z ________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von osm@pinns <osm@pinns.co.uk> Gesendet: Donnerstag, 8. Februar 2018 21:22 An: mkgmap-dev@lists.mkgmap.org.uk Betreff: Re: [mkgmap-dev] patch for crash in MapSource Hi Gerd, Having difficulty creating long distances without stopovers ikn Mapsource, but that seems have been the case anyway before dem, at least in my case using default style Have created a long distance one in Basecamp, exported it in Mapsource and absolutely no problem with creating profiles! Excellent work ! If I invert the route , ie in Basecamp, and export it in mapsource, same : no issues at all At one stage, I cannot reproduce it ,I just got a black profile, but that could be when I a dem was missing. On 08/02/2018 19:11, Gerd Petermann wrote:
Hi Nick,
great! In my test cases I found problems with long distance routes without any stopover. Please try that as well, maybe also the inverse routes.
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von osm@pinns <osm@pinns.co.uk> Gesendet: Donnerstag, 8. Februar 2018 19:01 An: mkgmap-dev@lists.mkgmap.org.uk Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Hi Gerd
Brilliant ! have done a really spaghetti route with lots of ups and downs left and right and
seems to be working with align-for-dem=360 and even
--dem-dists=2484,3312,9942,16560
r
Nick
On 08/02/2018 17:40, Gerd Petermann wrote:
Hi all,
I've created patches for splitter and mkgmap. The binaries are here: http://files.mkgmap.org.uk/download/417/splitter.jar http://files.mkgmap.org.uk/detail/416
Please try splitter with align-for-dem=360. I found no more crashes as long as used only one dem level, e.g. dem-dists=3312 or dem-dists=9936
Maybe you find a combination of align-for-dem and dem-dists with more than one value that still works, I'll try again tomorrow.
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk><mailto:mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von Gerd Petermann <gpetermann_muenchen@hotmail.com><mailto:gpetermann_muenchen@hotmail.com> Gesendet: Donnerstag, 8. Februar 2018 13:16 An: Development list for mkgmap Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Hi all,
the patch contained a stupid bug, but there is more to this: 1) the effect of the patch depends on the dem-dists value (I assume only the one that gives the highest resolution). The higher the resolution the better it works. 2) it probably also depends on the boundaries (areas.list)
I assume now that the tile boundary from areas.list should be a certain multiples of degrees, probably different multiples for lat and lon and that the overlap simply makes sure that this boundary is within the overlapped area. Maybe the preferred multiples also depend on the dem-dist.
I'll try to find out more ...
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk><mailto:mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von osm@pinns <osm@pinns.co.uk><mailto:osm@pinns.co.uk> Gesendet: Donnerstag, 8. Februar 2018 10:33 An: mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Hi Gerd
I think you are right ,ie
start and finishing point at same level seems OK eventhough the route turns south 20miles then up again
r
Nick
On 08/02/2018 09:27, Gerd Petermann wrote:
Hi all,
okay, thanks for testing. I'll try to find a better patch. Please check: I think the patch works fine for routes which cross tile borders in horizontal direction direction but I still see problems with vertical crossing. Can you confirm that?
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk><mailto:mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von Henning Scholland <osm@hscholland.de><mailto:osm@hscholland.de> Gesendet: Donnerstag, 8. Februar 2018 09:59 An: Development list for mkgmap Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Same for me, but just did quick test. Will try on the weekend more detailed Henning On 8 Feb 2018, at 16:57, lig fietser <ligfietser@hotmail.com<mailto:ligfietser@hotmail.com><mailto:ligfietser@hotmail.com><mailto:ligfietser@hotmail.com>> wrote:
Hi Gerd,
I tested your patch but I still see frequent crashes near tile borders.
________________________________ Van: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk><mailto:mkgmap-dev-bounces@lists.mkgmap.org.uk> namens Gerd Petermann <GPetermann_muenchen@hotmail.com><mailto:GPetermann_muenchen@hotmail.com> Verzonden: woensdag 7 februari 2018 02:45:27 Aan: mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> Onderwerp: [mkgmap-dev] patch for crash in MapSource
Hi all,
attached is a patch that seems to help in many cases where --dem-poly causes crashes in MapSource "Show Profile..." A binary is here: http://files.mkgmap.org.uk/download/414/mkgmap.jar
It changes the TRE file and the *.tdb file. I still see a few crashes but maybe those are caused by other problems.
Please try and let me know your results. I found no bad impact so far, long distance routing still seems to work, but I've not tested much.
@Steve: Maybe we have to make sure that the areas in *.tdb do not overlap. In this case this patch is not yet okay.
Gerd
________________________________
mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
Hi Gerd I can see that , but again no probs here when I used your map For my final trial i used some pbf files of the UK which were split last year without the align for dem option This still worked !, ie no crashes ; good point - have to check if the dem poly includes empty hgt files. Will do some more checking tomorrow. Again, congratulations on a major achievement! Nick On 08/02/2018 20:36, Gerd Petermann wrote:
Hi Nick,
okay, sounds good. Do you also use -dem-poly or hgt files with voids? I tested a rather small polygon [1] divided into 10 parts, maybe that created more stress for MapSource.
Maybe we can find other --align-for-dem values or -even better - a field in TRE or DEM or TDB that can be changed to allow more or all values.
Gerd
[1] http://files.mkgmap.org.uk/download/412/baddem6b.7z
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von osm@pinns <osm@pinns.co.uk> Gesendet: Donnerstag, 8. Februar 2018 21:22 An: mkgmap-dev@lists.mkgmap.org.uk Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Hi Gerd,
Having difficulty creating long distances without stopovers ikn Mapsource, but that seems have been the case anyway before dem, at least in my case using default style
Have created a long distance one in Basecamp, exported it in Mapsource and absolutely no problem with creating profiles! Excellent work !
If I invert the route , ie in Basecamp, and export it in mapsource, same : no issues at all
At one stage, I cannot reproduce it ,I just got a black profile, but that could be when I a dem was missing.
On 08/02/2018 19:11, Gerd Petermann wrote:
Hi Nick,
great! In my test cases I found problems with long distance routes without any stopover. Please try that as well, maybe also the inverse routes.
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von osm@pinns <osm@pinns.co.uk> Gesendet: Donnerstag, 8. Februar 2018 19:01 An: mkgmap-dev@lists.mkgmap.org.uk Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Hi Gerd
Brilliant ! have done a really spaghetti route with lots of ups and downs left and right and
seems to be working with align-for-dem=360 and even
--dem-dists=2484,3312,9942,16560
r
Nick
On 08/02/2018 17:40, Gerd Petermann wrote:
Hi all,
I've created patches for splitter and mkgmap. The binaries are here: http://files.mkgmap.org.uk/download/417/splitter.jar http://files.mkgmap.org.uk/detail/416
Please try splitter with align-for-dem=360. I found no more crashes as long as used only one dem level, e.g. dem-dists=3312 or dem-dists=9936
Maybe you find a combination of align-for-dem and dem-dists with more than one value that still works, I'll try again tomorrow.
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk><mailto:mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von Gerd Petermann <gpetermann_muenchen@hotmail.com><mailto:gpetermann_muenchen@hotmail.com> Gesendet: Donnerstag, 8. Februar 2018 13:16 An: Development list for mkgmap Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Hi all,
the patch contained a stupid bug, but there is more to this: 1) the effect of the patch depends on the dem-dists value (I assume only the one that gives the highest resolution). The higher the resolution the better it works. 2) it probably also depends on the boundaries (areas.list)
I assume now that the tile boundary from areas.list should be a certain multiples of degrees, probably different multiples for lat and lon and that the overlap simply makes sure that this boundary is within the overlapped area. Maybe the preferred multiples also depend on the dem-dist.
I'll try to find out more ...
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk><mailto:mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von osm@pinns <osm@pinns.co.uk><mailto:osm@pinns.co.uk> Gesendet: Donnerstag, 8. Februar 2018 10:33 An: mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Hi Gerd
I think you are right ,ie
start and finishing point at same level seems OK eventhough the route turns south 20miles then up again
r
Nick
On 08/02/2018 09:27, Gerd Petermann wrote:
Hi all,
okay, thanks for testing. I'll try to find a better patch. Please check: I think the patch works fine for routes which cross tile borders in horizontal direction direction but I still see problems with vertical crossing. Can you confirm that?
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk><mailto:mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von Henning Scholland <osm@hscholland.de><mailto:osm@hscholland.de> Gesendet: Donnerstag, 8. Februar 2018 09:59 An: Development list for mkgmap Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Same for me, but just did quick test. Will try on the weekend more detailed Henning On 8 Feb 2018, at 16:57, lig fietser <ligfietser@hotmail.com<mailto:ligfietser@hotmail.com><mailto:ligfietser@hotmail.com><mailto:ligfietser@hotmail.com>> wrote:
Hi Gerd,
I tested your patch but I still see frequent crashes near tile borders.
________________________________ Van: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk><mailto:mkgmap-dev-bounces@lists.mkgmap.org.uk> namens Gerd Petermann <GPetermann_muenchen@hotmail.com><mailto:GPetermann_muenchen@hotmail.com> Verzonden: woensdag 7 februari 2018 02:45:27 Aan: mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> Onderwerp: [mkgmap-dev] patch for crash in MapSource
Hi all,
attached is a patch that seems to help in many cases where --dem-poly causes crashes in MapSource "Show Profile..." A binary is here: http://files.mkgmap.org.uk/download/414/mkgmap.jar
It changes the TRE file and the *.tdb file. I still see a few crashes but maybe those are caused by other problems.
Please try and let me know your results. I found no bad impact so far, long distance routing still seems to work, but I've not tested much.
@Steve: Maybe we have to make sure that the areas in *.tdb do not overlap. In this case this patch is not yet okay.
Gerd
________________________________
mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
Hi Gerd Just noticed your crash.gdb , which indeed causes a crash However, if I take a different starting point but still join the a39 where your route joins it , I don't get a crash, Very odd that the end sames ok but the beginning. Anyway, will do some more checking tomorrow Nick On 08/02/2018 21:04, osm@pinns wrote:
Hi Gerd
I can see that , but again no probs here when I used your map
For my final trial i used some pbf files of the UK which were split last year without the align for dem option
This still worked !, ie no crashes ;
good point - have to check if the dem poly includes empty hgt files.
Will do some more checking tomorrow.
Again, congratulations on a major achievement!
Nick
On 08/02/2018 20:36, Gerd Petermann wrote:
Hi Nick,
okay, sounds good. Do you also use -dem-poly or hgt files with voids? I tested a rather small polygon [1] divided into 10 parts, maybe that created more stress for MapSource.
Maybe we can find other --align-for-dem values or -even better - a field in TRE or DEM or TDB that can be changed to allow more or all values.
Gerd
[1] http://files.mkgmap.org.uk/download/412/baddem6b.7z
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von osm@pinns <osm@pinns.co.uk> Gesendet: Donnerstag, 8. Februar 2018 21:22 An: mkgmap-dev@lists.mkgmap.org.uk Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Hi Gerd,
Having difficulty creating long distances without stopovers ikn Mapsource, but that seems have been the case anyway before dem, at least in my case using default style
Have created a long distance one in Basecamp, exported it in Mapsource and absolutely no problem with creating profiles! Excellent work !
If I invert the route , ie in Basecamp, and export it in mapsource, same : no issues at all
At one stage, I cannot reproduce it ,I just got a black profile, but that could be when I a dem was missing.
On 08/02/2018 19:11, Gerd Petermann wrote:
Hi Nick,
great! In my test cases I found problems with long distance routes without any stopover. Please try that as well, maybe also the inverse routes.
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von osm@pinns <osm@pinns.co.uk> Gesendet: Donnerstag, 8. Februar 2018 19:01 An: mkgmap-dev@lists.mkgmap.org.uk Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Hi Gerd
Brilliant ! have done a really spaghetti route with lots of ups and downs left and right and
seems to be working with align-for-dem=360 and even
--dem-dists=2484,3312,9942,16560
r
Nick
On 08/02/2018 17:40, Gerd Petermann wrote:
Hi all,
I've created patches for splitter and mkgmap. The binaries are here: http://files.mkgmap.org.uk/download/417/splitter.jar http://files.mkgmap.org.uk/detail/416
Please try splitter with align-for-dem=360. I found no more crashes as long as used only one dem level, e.g. dem-dists=3312 or dem-dists=9936
Maybe you find a combination of align-for-dem and dem-dists with more than one value that still works, I'll try again tomorrow.
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk><mailto:mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von Gerd Petermann <gpetermann_muenchen@hotmail.com><mailto:gpetermann_muenchen@hotmail.com> Gesendet: Donnerstag, 8. Februar 2018 13:16 An: Development list for mkgmap Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Hi all,
the patch contained a stupid bug, but there is more to this: 1) the effect of the patch depends on the dem-dists value (I assume only the one that gives the highest resolution). The higher the resolution the better it works. 2) it probably also depends on the boundaries (areas.list)
I assume now that the tile boundary from areas.list should be a certain multiples of degrees, probably different multiples for lat and lon and that the overlap simply makes sure that this boundary is within the overlapped area. Maybe the preferred multiples also depend on the dem-dist.
I'll try to find out more ...
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk><mailto:mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von osm@pinns <osm@pinns.co.uk><mailto:osm@pinns.co.uk> Gesendet: Donnerstag, 8. Februar 2018 10:33 An: mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Hi Gerd
I think you are right ,ie
start and finishing point at same level seems OK eventhough the route turns south 20miles then up again
r
Nick
On 08/02/2018 09:27, Gerd Petermann wrote:
Hi all,
okay, thanks for testing. I'll try to find a better patch. Please check: I think the patch works fine for routes which cross tile borders in horizontal direction direction but I still see problems with vertical crossing. Can you confirm that?
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk><mailto:mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von Henning Scholland <osm@hscholland.de><mailto:osm@hscholland.de> Gesendet: Donnerstag, 8. Februar 2018 09:59 An: Development list for mkgmap Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Same for me, but just did quick test. Will try on the weekend more detailed Henning On 8 Feb 2018, at 16:57, lig fietser <ligfietser@hotmail.com<mailto:ligfietser@hotmail.com><mailto:ligfietser@hotmail.com><mailto:ligfietser@hotmail.com>> wrote:
Hi Gerd,
I tested your patch but I still see frequent crashes near tile borders.
________________________________ Van: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk><mailto:mkgmap-dev-bounces@lists.mkgmap.org.uk> namens Gerd Petermann <GPetermann_muenchen@hotmail.com><mailto:GPetermann_muenchen@hotmail.com> Verzonden: woensdag 7 februari 2018 02:45:27 Aan: mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> Onderwerp: [mkgmap-dev] patch for crash in MapSource
Hi all,
attached is a patch that seems to help in many cases where --dem-poly causes crashes in MapSource "Show Profile..." A binary is here: http://files.mkgmap.org.uk/download/414/mkgmap.jar
It changes the TRE file and the *.tdb file. I still see a few crashes but maybe those are caused by other problems.
Please try and let me know your results. I found no bad impact so far, long distance routing still seems to work, but I've not tested much.
@Steve: Maybe we have to make sure that the areas in *.tdb do not overlap. In this case this patch is not yet okay.
Gerd
________________________________
mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
Hi Nick, I tried --align-for-dem=360 with your --dem-dists=2484,3312,9942,16560 and my dem-poly and it always crashes :-( It always seems to work with only one of the values, e.g. --dem-dists=2484 or --dem-dists=3312 or --dem-dists=16560 So, it seems that I was wrong when I thought that the code behind the "Show Profile..." button would ignore all but the highest resolution. Gerd ________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von osm@pinns <osm@pinns.co.uk> Gesendet: Donnerstag, 8. Februar 2018 22:19 An: mkgmap-dev@lists.mkgmap.org.uk Betreff: Re: [mkgmap-dev] patch for crash in MapSource Hi Gerd Just noticed your crash.gdb , which indeed causes a crash However, if I take a different starting point but still join the a39 where your route joins it , I don't get a crash, Very odd that the end sames ok but the beginning. Anyway, will do some more checking tomorrow Nick On 08/02/2018 21:04, osm@pinns wrote:
Hi Gerd
I can see that , but again no probs here when I used your map
For my final trial i used some pbf files of the UK which were split last year without the align for dem option
This still worked !, ie no crashes ;
good point - have to check if the dem poly includes empty hgt files.
Will do some more checking tomorrow.
Again, congratulations on a major achievement!
Nick
On 08/02/2018 20:36, Gerd Petermann wrote:
Hi Nick,
okay, sounds good. Do you also use -dem-poly or hgt files with voids? I tested a rather small polygon [1] divided into 10 parts, maybe that created more stress for MapSource.
Maybe we can find other --align-for-dem values or -even better - a field in TRE or DEM or TDB that can be changed to allow more or all values.
Gerd
[1] http://files.mkgmap.org.uk/download/412/baddem6b.7z
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von osm@pinns <osm@pinns.co.uk> Gesendet: Donnerstag, 8. Februar 2018 21:22 An: mkgmap-dev@lists.mkgmap.org.uk Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Hi Gerd,
Having difficulty creating long distances without stopovers ikn Mapsource, but that seems have been the case anyway before dem, at least in my case using default style
Have created a long distance one in Basecamp, exported it in Mapsource and absolutely no problem with creating profiles! Excellent work !
If I invert the route , ie in Basecamp, and export it in mapsource, same : no issues at all
At one stage, I cannot reproduce it ,I just got a black profile, but that could be when I a dem was missing.
On 08/02/2018 19:11, Gerd Petermann wrote:
Hi Nick,
great! In my test cases I found problems with long distance routes without any stopover. Please try that as well, maybe also the inverse routes.
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von osm@pinns <osm@pinns.co.uk> Gesendet: Donnerstag, 8. Februar 2018 19:01 An: mkgmap-dev@lists.mkgmap.org.uk Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Hi Gerd
Brilliant ! have done a really spaghetti route with lots of ups and downs left and right and
seems to be working with align-for-dem=360 and even
--dem-dists=2484,3312,9942,16560
r
Nick
On 08/02/2018 17:40, Gerd Petermann wrote:
Hi all,
I've created patches for splitter and mkgmap. The binaries are here: http://files.mkgmap.org.uk/download/417/splitter.jar http://files.mkgmap.org.uk/detail/416
Please try splitter with align-for-dem=360. I found no more crashes as long as used only one dem level, e.g. dem-dists=3312 or dem-dists=9936
Maybe you find a combination of align-for-dem and dem-dists with more than one value that still works, I'll try again tomorrow.
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk><mailto:mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von Gerd Petermann <gpetermann_muenchen@hotmail.com><mailto:gpetermann_muenchen@hotmail.com> Gesendet: Donnerstag, 8. Februar 2018 13:16 An: Development list for mkgmap Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Hi all,
the patch contained a stupid bug, but there is more to this: 1) the effect of the patch depends on the dem-dists value (I assume only the one that gives the highest resolution). The higher the resolution the better it works. 2) it probably also depends on the boundaries (areas.list)
I assume now that the tile boundary from areas.list should be a certain multiples of degrees, probably different multiples for lat and lon and that the overlap simply makes sure that this boundary is within the overlapped area. Maybe the preferred multiples also depend on the dem-dist.
I'll try to find out more ...
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk><mailto:mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von osm@pinns <osm@pinns.co.uk><mailto:osm@pinns.co.uk> Gesendet: Donnerstag, 8. Februar 2018 10:33 An: mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Hi Gerd
I think you are right ,ie
start and finishing point at same level seems OK eventhough the route turns south 20miles then up again
r
Nick
On 08/02/2018 09:27, Gerd Petermann wrote:
Hi all,
okay, thanks for testing. I'll try to find a better patch. Please check: I think the patch works fine for routes which cross tile borders in horizontal direction direction but I still see problems with vertical crossing. Can you confirm that?
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk><mailto:mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von Henning Scholland <osm@hscholland.de><mailto:osm@hscholland.de> Gesendet: Donnerstag, 8. Februar 2018 09:59 An: Development list for mkgmap Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Same for me, but just did quick test. Will try on the weekend more detailed Henning On 8 Feb 2018, at 16:57, lig fietser <ligfietser@hotmail.com<mailto:ligfietser@hotmail.com><mailto:ligfietser@hotmail.com><mailto:ligfietser@hotmail.com>> wrote:
Hi Gerd,
I tested your patch but I still see frequent crashes near tile borders.
________________________________ Van: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk><mailto:mkgmap-dev-bounces@lists.mkgmap.org.uk> namens Gerd Petermann <GPetermann_muenchen@hotmail.com><mailto:GPetermann_muenchen@hotmail.com> Verzonden: woensdag 7 februari 2018 02:45:27 Aan: mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> Onderwerp: [mkgmap-dev] patch for crash in MapSource
Hi all,
attached is a patch that seems to help in many cases where --dem-poly causes crashes in MapSource "Show Profile..." A binary is here: http://files.mkgmap.org.uk/download/414/mkgmap.jar
It changes the TRE file and the *.tdb file. I still see a few crashes but maybe those are caused by other problems.
Please try and let me know your results. I found no bad impact so far, long distance routing still seems to work, but I've not tested much.
@Steve: Maybe we have to make sure that the areas in *.tdb do not overlap. In this case this patch is not yet okay.
Gerd
________________________________
mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
Hi Gerd I'm getting the same issues when I split Devon with max nodes 10 000 in fact anything below 40 000 causes a crash The tests I made yesterday was with max nodes 80 000, so perhaps somehow its linked to the maxnodes? r Nick On 09/02/2018 08:01, Gerd Petermann wrote:
Hi Nick,
I tried --align-for-dem=360 with your --dem-dists=2484,3312,9942,16560 and my dem-poly and it always crashes :-(
It always seems to work with only one of the values, e.g. --dem-dists=2484 or --dem-dists=3312 or --dem-dists=16560
So, it seems that I was wrong when I thought that the code behind the "Show Profile..." button would ignore all but the highest resolution.
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von osm@pinns <osm@pinns.co.uk> Gesendet: Donnerstag, 8. Februar 2018 22:19 An: mkgmap-dev@lists.mkgmap.org.uk Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Hi Gerd
Just noticed your crash.gdb , which indeed causes a crash
However, if I take a different starting point but still join the a39 where your route joins it , I don't get a crash,
Very odd that the end sames ok but the beginning.
Anyway, will do some more checking tomorrow
Nick On 08/02/2018 21:04, osm@pinns wrote:
Hi Gerd
I can see that , but again no probs here when I used your map
For my final trial i used some pbf files of the UK which were split last year without the align for dem option
This still worked !, ie no crashes ;
good point - have to check if the dem poly includes empty hgt files.
Will do some more checking tomorrow.
Again, congratulations on a major achievement!
Nick
On 08/02/2018 20:36, Gerd Petermann wrote:
Hi Nick,
okay, sounds good. Do you also use -dem-poly or hgt files with voids? I tested a rather small polygon [1] divided into 10 parts, maybe that created more stress for MapSource.
Maybe we can find other --align-for-dem values or -even better - a field in TRE or DEM or TDB that can be changed to allow more or all values.
Gerd
[1] http://files.mkgmap.org.uk/download/412/baddem6b.7z
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von osm@pinns <osm@pinns.co.uk> Gesendet: Donnerstag, 8. Februar 2018 21:22 An: mkgmap-dev@lists.mkgmap.org.uk Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Hi Gerd,
Having difficulty creating long distances without stopovers ikn Mapsource, but that seems have been the case anyway before dem, at least in my case using default style
Have created a long distance one in Basecamp, exported it in Mapsource and absolutely no problem with creating profiles! Excellent work !
If I invert the route , ie in Basecamp, and export it in mapsource, same : no issues at all
At one stage, I cannot reproduce it ,I just got a black profile, but that could be when I a dem was missing.
On 08/02/2018 19:11, Gerd Petermann wrote:
Hi Nick,
great! In my test cases I found problems with long distance routes without any stopover. Please try that as well, maybe also the inverse routes.
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von osm@pinns <osm@pinns.co.uk> Gesendet: Donnerstag, 8. Februar 2018 19:01 An: mkgmap-dev@lists.mkgmap.org.uk Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Hi Gerd
Brilliant ! have done a really spaghetti route with lots of ups and downs left and right and
seems to be working with align-for-dem=360 and even
--dem-dists=2484,3312,9942,16560
r
Nick
On 08/02/2018 17:40, Gerd Petermann wrote:
Hi all,
I've created patches for splitter and mkgmap. The binaries are here: http://files.mkgmap.org.uk/download/417/splitter.jar http://files.mkgmap.org.uk/detail/416
Please try splitter with align-for-dem=360. I found no more crashes as long as used only one dem level, e.g. dem-dists=3312 or dem-dists=9936
Maybe you find a combination of align-for-dem and dem-dists with more than one value that still works, I'll try again tomorrow.
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk><mailto:mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von Gerd Petermann <gpetermann_muenchen@hotmail.com><mailto:gpetermann_muenchen@hotmail.com> Gesendet: Donnerstag, 8. Februar 2018 13:16 An: Development list for mkgmap Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Hi all,
the patch contained a stupid bug, but there is more to this: 1) the effect of the patch depends on the dem-dists value (I assume only the one that gives the highest resolution). The higher the resolution the better it works. 2) it probably also depends on the boundaries (areas.list)
I assume now that the tile boundary from areas.list should be a certain multiples of degrees, probably different multiples for lat and lon and that the overlap simply makes sure that this boundary is within the overlapped area. Maybe the preferred multiples also depend on the dem-dist.
I'll try to find out more ...
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk><mailto:mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von osm@pinns <osm@pinns.co.uk><mailto:osm@pinns.co.uk> Gesendet: Donnerstag, 8. Februar 2018 10:33 An: mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Hi Gerd
I think you are right ,ie
start and finishing point at same level seems OK eventhough the route turns south 20miles then up again
r
Nick
On 08/02/2018 09:27, Gerd Petermann wrote:
Hi all,
okay, thanks for testing. I'll try to find a better patch. Please check: I think the patch works fine for routes which cross tile borders in horizontal direction direction but I still see problems with vertical crossing. Can you confirm that?
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk><mailto:mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von Henning Scholland <osm@hscholland.de><mailto:osm@hscholland.de> Gesendet: Donnerstag, 8. Februar 2018 09:59 An: Development list for mkgmap Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Same for me, but just did quick test. Will try on the weekend more detailed Henning On 8 Feb 2018, at 16:57, lig fietser <ligfietser@hotmail.com<mailto:ligfietser@hotmail.com><mailto:ligfietser@hotmail.com><mailto:ligfietser@hotmail.com>> wrote:
Hi Gerd,
I tested your patch but I still see frequent crashes near tile borders.
________________________________ Van: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk><mailto:mkgmap-dev-bounces@lists.mkgmap.org.uk> namens Gerd Petermann <GPetermann_muenchen@hotmail.com><mailto:GPetermann_muenchen@hotmail.com> Verzonden: woensdag 7 februari 2018 02:45:27 Aan: mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> Onderwerp: [mkgmap-dev] patch for crash in MapSource
Hi all,
attached is a patch that seems to help in many cases where --dem-poly causes crashes in MapSource "Show Profile..." A binary is here: http://files.mkgmap.org.uk/download/414/mkgmap.jar
It changes the TRE file and the *.tdb file. I still see a few crashes but maybe those are caused by other problems.
Please try and let me know your results. I found no bad impact so far, long distance routing still seems to work, but I've not tested much.
@Steve: Maybe we have to make sure that the areas in *.tdb do not overlap. In this case this patch is not yet okay.
Gerd
________________________________
mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
Hi Nick, I use max-nodes=100 000, not 10 000, but you may be right that this is important. I'll try again with realistic values. Gerd ________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von osm@pinns <osm@pinns.co.uk> Gesendet: Freitag, 9. Februar 2018 09:38 An: mkgmap-dev@lists.mkgmap.org.uk Betreff: Re: [mkgmap-dev] patch for crash in MapSource Hi Gerd I'm getting the same issues when I split Devon with max nodes 10 000 in fact anything below 40 000 causes a crash The tests I made yesterday was with max nodes 80 000, so perhaps somehow its linked to the maxnodes? r Nick On 09/02/2018 08:01, Gerd Petermann wrote:
Hi Nick,
I tried --align-for-dem=360 with your --dem-dists=2484,3312,9942,16560 and my dem-poly and it always crashes :-(
It always seems to work with only one of the values, e.g. --dem-dists=2484 or --dem-dists=3312 or --dem-dists=16560
So, it seems that I was wrong when I thought that the code behind the "Show Profile..." button would ignore all but the highest resolution.
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von osm@pinns <osm@pinns.co.uk> Gesendet: Donnerstag, 8. Februar 2018 22:19 An: mkgmap-dev@lists.mkgmap.org.uk Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Hi Gerd
Just noticed your crash.gdb , which indeed causes a crash
However, if I take a different starting point but still join the a39 where your route joins it , I don't get a crash,
Very odd that the end sames ok but the beginning.
Anyway, will do some more checking tomorrow
Nick On 08/02/2018 21:04, osm@pinns wrote:
Hi Gerd
I can see that , but again no probs here when I used your map
For my final trial i used some pbf files of the UK which were split last year without the align for dem option
This still worked !, ie no crashes ;
good point - have to check if the dem poly includes empty hgt files.
Will do some more checking tomorrow.
Again, congratulations on a major achievement!
Nick
On 08/02/2018 20:36, Gerd Petermann wrote:
Hi Nick,
okay, sounds good. Do you also use -dem-poly or hgt files with voids? I tested a rather small polygon [1] divided into 10 parts, maybe that created more stress for MapSource.
Maybe we can find other --align-for-dem values or -even better - a field in TRE or DEM or TDB that can be changed to allow more or all values.
Gerd
[1] http://files.mkgmap.org.uk/download/412/baddem6b.7z
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von osm@pinns <osm@pinns.co.uk> Gesendet: Donnerstag, 8. Februar 2018 21:22 An: mkgmap-dev@lists.mkgmap.org.uk Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Hi Gerd,
Having difficulty creating long distances without stopovers ikn Mapsource, but that seems have been the case anyway before dem, at least in my case using default style
Have created a long distance one in Basecamp, exported it in Mapsource and absolutely no problem with creating profiles! Excellent work !
If I invert the route , ie in Basecamp, and export it in mapsource, same : no issues at all
At one stage, I cannot reproduce it ,I just got a black profile, but that could be when I a dem was missing.
On 08/02/2018 19:11, Gerd Petermann wrote:
Hi Nick,
great! In my test cases I found problems with long distance routes without any stopover. Please try that as well, maybe also the inverse routes.
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von osm@pinns <osm@pinns.co.uk> Gesendet: Donnerstag, 8. Februar 2018 19:01 An: mkgmap-dev@lists.mkgmap.org.uk Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Hi Gerd
Brilliant ! have done a really spaghetti route with lots of ups and downs left and right and
seems to be working with align-for-dem=360 and even
--dem-dists=2484,3312,9942,16560
r
Nick
On 08/02/2018 17:40, Gerd Petermann wrote:
Hi all,
I've created patches for splitter and mkgmap. The binaries are here: http://files.mkgmap.org.uk/download/417/splitter.jar http://files.mkgmap.org.uk/detail/416
Please try splitter with align-for-dem=360. I found no more crashes as long as used only one dem level, e.g. dem-dists=3312 or dem-dists=9936
Maybe you find a combination of align-for-dem and dem-dists with more than one value that still works, I'll try again tomorrow.
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk><mailto:mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von Gerd Petermann <gpetermann_muenchen@hotmail.com><mailto:gpetermann_muenchen@hotmail.com> Gesendet: Donnerstag, 8. Februar 2018 13:16 An: Development list for mkgmap Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Hi all,
the patch contained a stupid bug, but there is more to this: 1) the effect of the patch depends on the dem-dists value (I assume only the one that gives the highest resolution). The higher the resolution the better it works. 2) it probably also depends on the boundaries (areas.list)
I assume now that the tile boundary from areas.list should be a certain multiples of degrees, probably different multiples for lat and lon and that the overlap simply makes sure that this boundary is within the overlapped area. Maybe the preferred multiples also depend on the dem-dist.
I'll try to find out more ...
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk><mailto:mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von osm@pinns <osm@pinns.co.uk><mailto:osm@pinns.co.uk> Gesendet: Donnerstag, 8. Februar 2018 10:33 An: mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Hi Gerd
I think you are right ,ie
start and finishing point at same level seems OK eventhough the route turns south 20miles then up again
r
Nick
On 08/02/2018 09:27, Gerd Petermann wrote:
Hi all,
okay, thanks for testing. I'll try to find a better patch. Please check: I think the patch works fine for routes which cross tile borders in horizontal direction direction but I still see problems with vertical crossing. Can you confirm that?
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk><mailto:mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von Henning Scholland <osm@hscholland.de><mailto:osm@hscholland.de> Gesendet: Donnerstag, 8. Februar 2018 09:59 An: Development list for mkgmap Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Same for me, but just did quick test. Will try on the weekend more detailed Henning On 8 Feb 2018, at 16:57, lig fietser <ligfietser@hotmail.com<mailto:ligfietser@hotmail.com><mailto:ligfietser@hotmail.com><mailto:ligfietser@hotmail.com>> wrote:
Hi Gerd,
I tested your patch but I still see frequent crashes near tile borders.
________________________________ Van: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk><mailto:mkgmap-dev-bounces@lists.mkgmap.org.uk> namens Gerd Petermann <GPetermann_muenchen@hotmail.com><mailto:GPetermann_muenchen@hotmail.com> Verzonden: woensdag 7 februari 2018 02:45:27 Aan: mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> Onderwerp: [mkgmap-dev] patch for crash in MapSource
Hi all,
attached is a patch that seems to help in many cases where --dem-poly causes crashes in MapSource "Show Profile..." A binary is here: http://files.mkgmap.org.uk/download/414/mkgmap.jar
It changes the TRE file and the *.tdb file. I still see a few crashes but maybe those are caused by other problems.
Please try and let me know your results. I found no bad impact so far, long distance routing still seems to work, but I've not tested much.
@Steve: Maybe we have to make sure that the areas in *.tdb do not overlap. In this case this patch is not yet okay.
Gerd
________________________________
mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
Hi Gerd, Sorry , I mean 100, 000 and with me values <400 000 cause a problem Nick On 09/02/2018 08:56, Gerd Petermann wrote:
Hi Nick,
I use max-nodes=100 000, not 10 000, but you may be right that this is important. I'll try again with realistic values.
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von osm@pinns <osm@pinns.co.uk> Gesendet: Freitag, 9. Februar 2018 09:38 An: mkgmap-dev@lists.mkgmap.org.uk Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Hi Gerd
I'm getting the same issues when I split Devon with max nodes 10 000
in fact anything below 40 000 causes a crash
The tests I made yesterday was with max nodes 80 000, so perhaps somehow its linked to the maxnodes?
r
Nick
On 09/02/2018 08:01, Gerd Petermann wrote:
Hi Nick,
I tried --align-for-dem=360 with your --dem-dists=2484,3312,9942,16560 and my dem-poly and it always crashes :-(
It always seems to work with only one of the values, e.g. --dem-dists=2484 or --dem-dists=3312 or --dem-dists=16560
So, it seems that I was wrong when I thought that the code behind the "Show Profile..." button would ignore all but the highest resolution.
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von osm@pinns <osm@pinns.co.uk> Gesendet: Donnerstag, 8. Februar 2018 22:19 An: mkgmap-dev@lists.mkgmap.org.uk Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Hi Gerd
Just noticed your crash.gdb , which indeed causes a crash
However, if I take a different starting point but still join the a39 where your route joins it , I don't get a crash,
Very odd that the end sames ok but the beginning.
Anyway, will do some more checking tomorrow
Nick On 08/02/2018 21:04, osm@pinns wrote:
Hi Gerd
I can see that , but again no probs here when I used your map
For my final trial i used some pbf files of the UK which were split last year without the align for dem option
This still worked !, ie no crashes ;
good point - have to check if the dem poly includes empty hgt files.
Will do some more checking tomorrow.
Again, congratulations on a major achievement!
Nick
On 08/02/2018 20:36, Gerd Petermann wrote:
Hi Nick,
okay, sounds good. Do you also use -dem-poly or hgt files with voids? I tested a rather small polygon [1] divided into 10 parts, maybe that created more stress for MapSource.
Maybe we can find other --align-for-dem values or -even better - a field in TRE or DEM or TDB that can be changed to allow more or all values.
Gerd
[1] http://files.mkgmap.org.uk/download/412/baddem6b.7z
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von osm@pinns <osm@pinns.co.uk> Gesendet: Donnerstag, 8. Februar 2018 21:22 An: mkgmap-dev@lists.mkgmap.org.uk Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Hi Gerd,
Having difficulty creating long distances without stopovers ikn Mapsource, but that seems have been the case anyway before dem, at least in my case using default style
Have created a long distance one in Basecamp, exported it in Mapsource and absolutely no problem with creating profiles! Excellent work !
If I invert the route , ie in Basecamp, and export it in mapsource, same : no issues at all
At one stage, I cannot reproduce it ,I just got a black profile, but that could be when I a dem was missing.
On 08/02/2018 19:11, Gerd Petermann wrote:
Hi Nick,
great! In my test cases I found problems with long distance routes without any stopover. Please try that as well, maybe also the inverse routes.
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von osm@pinns <osm@pinns.co.uk> Gesendet: Donnerstag, 8. Februar 2018 19:01 An: mkgmap-dev@lists.mkgmap.org.uk Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Hi Gerd
Brilliant ! have done a really spaghetti route with lots of ups and downs left and right and
seems to be working with align-for-dem=360 and even
--dem-dists=2484,3312,9942,16560
r
Nick
On 08/02/2018 17:40, Gerd Petermann wrote:
Hi all,
I've created patches for splitter and mkgmap. The binaries are here: http://files.mkgmap.org.uk/download/417/splitter.jar http://files.mkgmap.org.uk/detail/416
Please try splitter with align-for-dem=360. I found no more crashes as long as used only one dem level, e.g. dem-dists=3312 or dem-dists=9936
Maybe you find a combination of align-for-dem and dem-dists with more than one value that still works, I'll try again tomorrow.
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk><mailto:mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von Gerd Petermann <gpetermann_muenchen@hotmail.com><mailto:gpetermann_muenchen@hotmail.com> Gesendet: Donnerstag, 8. Februar 2018 13:16 An: Development list for mkgmap Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Hi all,
the patch contained a stupid bug, but there is more to this: 1) the effect of the patch depends on the dem-dists value (I assume only the one that gives the highest resolution). The higher the resolution the better it works. 2) it probably also depends on the boundaries (areas.list)
I assume now that the tile boundary from areas.list should be a certain multiples of degrees, probably different multiples for lat and lon and that the overlap simply makes sure that this boundary is within the overlapped area. Maybe the preferred multiples also depend on the dem-dist.
I'll try to find out more ...
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk><mailto:mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von osm@pinns <osm@pinns.co.uk><mailto:osm@pinns.co.uk> Gesendet: Donnerstag, 8. Februar 2018 10:33 An: mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Hi Gerd
I think you are right ,ie
start and finishing point at same level seems OK eventhough the route turns south 20miles then up again
r
Nick
On 08/02/2018 09:27, Gerd Petermann wrote:
Hi all,
okay, thanks for testing. I'll try to find a better patch. Please check: I think the patch works fine for routes which cross tile borders in horizontal direction direction but I still see problems with vertical crossing. Can you confirm that?
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk><mailto:mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von Henning Scholland <osm@hscholland.de><mailto:osm@hscholland.de> Gesendet: Donnerstag, 8. Februar 2018 09:59 An: Development list for mkgmap Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Same for me, but just did quick test. Will try on the weekend more detailed Henning On 8 Feb 2018, at 16:57, lig fietser <ligfietser@hotmail.com<mailto:ligfietser@hotmail.com><mailto:ligfietser@hotmail.com><mailto:ligfietser@hotmail.com>> wrote:
Hi Gerd,
I tested your patch but I still see frequent crashes near tile borders.
________________________________ Van: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk><mailto:mkgmap-dev-bounces@lists.mkgmap.org.uk> namens Gerd Petermann <GPetermann_muenchen@hotmail.com><mailto:GPetermann_muenchen@hotmail.com> Verzonden: woensdag 7 februari 2018 02:45:27 Aan: mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> Onderwerp: [mkgmap-dev] patch for crash in MapSource
Hi all,
attached is a patch that seems to help in many cases where --dem-poly causes crashes in MapSource "Show Profile..." A binary is here: http://files.mkgmap.org.uk/download/414/mkgmap.jar
It changes the TRE file and the *.tdb file. I still see a few crashes but maybe those are caused by other problems.
Please try and let me know your results. I found no bad impact so far, long distance routing still seems to work, but I've not tested much.
@Steve: Maybe we have to make sure that the areas in *.tdb do not overlap. In this case this patch is not yet okay.
Gerd
________________________________
mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
Hi Gerd, Unfortunately your patches don't work for me, I still get crashes crossing tile borders. Here are two tiles where it happens frequently: 10010071: 2418715,198712 to 2424800,208938 # : 51.899993,4.263897 to 52.030563,4.483323 10010104: 2424800,202725 to 2428942,223178 # : 52.030563,4.350007 to 52.119441,4.788880 I have uploaded them here: http://mijndev.openstreetmap.nl/~ligfietser/mkgmap/ ________________________________ Van: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> namens osm@pinns <osm@pinns.co.uk> Verzonden: vrijdag 9 februari 2018 01:02:45 Aan: Gerd Petermann; mkgmap-dev@lists.mkgmap.org.uk Onderwerp: Re: [mkgmap-dev] patch for crash in MapSource Hi Gerd, Sorry , I mean 100, 000 and with me values <400 000 cause a problem Nick On 09/02/2018 08:56, Gerd Petermann wrote:
Hi Nick,
I use max-nodes=100 000, not 10 000, but you may be right that this is important. I'll try again with realistic values.
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von osm@pinns <osm@pinns.co.uk> Gesendet: Freitag, 9. Februar 2018 09:38 An: mkgmap-dev@lists.mkgmap.org.uk Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Hi Gerd
I'm getting the same issues when I split Devon with max nodes 10 000
in fact anything below 40 000 causes a crash
The tests I made yesterday was with max nodes 80 000, so perhaps somehow its linked to the maxnodes?
r
Nick
On 09/02/2018 08:01, Gerd Petermann wrote:
Hi Nick,
I tried --align-for-dem=360 with your --dem-dists=2484,3312,9942,16560 and my dem-poly and it always crashes :-(
It always seems to work with only one of the values, e.g. --dem-dists=2484 or --dem-dists=3312 or --dem-dists=16560
So, it seems that I was wrong when I thought that the code behind the "Show Profile..." button would ignore all but the highest resolution.
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von osm@pinns <osm@pinns.co.uk> Gesendet: Donnerstag, 8. Februar 2018 22:19 An: mkgmap-dev@lists.mkgmap.org.uk Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Hi Gerd
Just noticed your crash.gdb , which indeed causes a crash
However, if I take a different starting point but still join the a39 where your route joins it , I don't get a crash,
Very odd that the end sames ok but the beginning.
Anyway, will do some more checking tomorrow
Nick On 08/02/2018 21:04, osm@pinns wrote:
Hi Gerd
I can see that , but again no probs here when I used your map
For my final trial i used some pbf files of the UK which were split last year without the align for dem option
This still worked !, ie no crashes ;
good point - have to check if the dem poly includes empty hgt files.
Will do some more checking tomorrow.
Again, congratulations on a major achievement!
Nick
On 08/02/2018 20:36, Gerd Petermann wrote:
Hi Nick,
okay, sounds good. Do you also use -dem-poly or hgt files with voids? I tested a rather small polygon [1] divided into 10 parts, maybe that created more stress for MapSource.
Maybe we can find other --align-for-dem values or -even better - a field in TRE or DEM or TDB that can be changed to allow more or all values.
Gerd
[1] http://files.mkgmap.org.uk/download/412/baddem6b.7z
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von osm@pinns <osm@pinns.co.uk> Gesendet: Donnerstag, 8. Februar 2018 21:22 An: mkgmap-dev@lists.mkgmap.org.uk Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Hi Gerd,
Having difficulty creating long distances without stopovers ikn Mapsource, but that seems have been the case anyway before dem, at least in my case using default style
Have created a long distance one in Basecamp, exported it in Mapsource and absolutely no problem with creating profiles! Excellent work !
If I invert the route , ie in Basecamp, and export it in mapsource, same : no issues at all
At one stage, I cannot reproduce it ,I just got a black profile, but that could be when I a dem was missing.
On 08/02/2018 19:11, Gerd Petermann wrote:
Hi Nick,
great! In my test cases I found problems with long distance routes without any stopover. Please try that as well, maybe also the inverse routes.
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von osm@pinns <osm@pinns.co.uk> Gesendet: Donnerstag, 8. Februar 2018 19:01 An: mkgmap-dev@lists.mkgmap.org.uk Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Hi Gerd
Brilliant ! have done a really spaghetti route with lots of ups and downs left and right and
seems to be working with align-for-dem=360 and even
--dem-dists=2484,3312,9942,16560
r
Nick
On 08/02/2018 17:40, Gerd Petermann wrote:
Hi all,
I've created patches for splitter and mkgmap. The binaries are here: http://files.mkgmap.org.uk/download/417/splitter.jar http://files.mkgmap.org.uk/detail/416
Please try splitter with align-for-dem=360. I found no more crashes as long as used only one dem level, e.g. dem-dists=3312 or dem-dists=9936
Maybe you find a combination of align-for-dem and dem-dists with more than one value that still works, I'll try again tomorrow.
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk><mailto:mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von Gerd Petermann <gpetermann_muenchen@hotmail.com><mailto:gpetermann_muenchen@hotmail.com> Gesendet: Donnerstag, 8. Februar 2018 13:16 An: Development list for mkgmap Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Hi all,
the patch contained a stupid bug, but there is more to this: 1) the effect of the patch depends on the dem-dists value (I assume only the one that gives the highest resolution). The higher the resolution the better it works. 2) it probably also depends on the boundaries (areas.list)
I assume now that the tile boundary from areas.list should be a certain multiples of degrees, probably different multiples for lat and lon and that the overlap simply makes sure that this boundary is within the overlapped area. Maybe the preferred multiples also depend on the dem-dist.
I'll try to find out more ...
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk><mailto:mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von osm@pinns <osm@pinns.co.uk><mailto:osm@pinns.co.uk> Gesendet: Donnerstag, 8. Februar 2018 10:33 An: mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Hi Gerd
I think you are right ,ie
start and finishing point at same level seems OK eventhough the route turns south 20miles then up again
r
Nick
On 08/02/2018 09:27, Gerd Petermann wrote:
Hi all,
okay, thanks for testing. I'll try to find a better patch. Please check: I think the patch works fine for routes which cross tile borders in horizontal direction direction but I still see problems with vertical crossing. Can you confirm that?
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk><mailto:mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von Henning Scholland <osm@hscholland.de><mailto:osm@hscholland.de> Gesendet: Donnerstag, 8. Februar 2018 09:59 An: Development list for mkgmap Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Same for me, but just did quick test. Will try on the weekend more detailed Henning On 8 Feb 2018, at 16:57, lig fietser <ligfietser@hotmail.com<mailto:ligfietser@hotmail.com><mailto:ligfietser@hotmail.com><mailto:ligfietser@hotmail.com>> wrote:
Hi Gerd,
I tested your patch but I still see frequent crashes near tile borders.
________________________________ Van: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk><mailto:mkgmap-dev-bounces@lists.mkgmap.org.uk> namens Gerd Petermann <GPetermann_muenchen@hotmail.com><mailto:GPetermann_muenchen@hotmail.com> Verzonden: woensdag 7 februari 2018 02:45:27 Aan: mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> Onderwerp: [mkgmap-dev] patch for crash in MapSource
Hi all,
attached is a patch that seems to help in many cases where --dem-poly causes crashes in MapSource "Show Profile..." A binary is here: http://files.mkgmap.org.uk/download/414/mkgmap.jar
It changes the TRE file and the *.tdb file. I still see a few crashes but maybe those are caused by other problems.
Please try and let me know your results. I found no bad impact so far, long distance routing still seems to work, but I've not tested much.
@Steve: Maybe we have to make sure that the areas in *.tdb do not overlap. In this case this patch is not yet okay.
Gerd
________________________________
mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
Hi all, If I got that right the dem-dist value 9936 means that splitter should create boundaries with a multiple of 621 map units: 621 * 256 = 158976 = 16 * 9936 This should work fine for 3312, 6624 as well. It seems that we always see problems when a tile boundary is far away from this. I assume that Garmin selects all dem-dists values so that there multiples are close to certain values and those values are used to split. The overlap in TRE seems to allow small differences, but e.g. a split at lat 2424800 never works with 3312,6624 or 9936, and Minkos tiles were split at this lat. So, the current patch for splitter doesn't help as it tries to align to 1/360° when you use --align-for-dem=360. I still try to find out how many levels we have to align, maybe only the first and the 2nd are important, maybe all. I am not yet sure what that means for the split algo. Gerd ________________________________________ Von: osm@pinns <osm@pinns.co.uk> Gesendet: Donnerstag, 8. Februar 2018 22:04 An: Gerd Petermann; mkgmap-dev@lists.mkgmap.org.uk Betreff: Re: AW: [mkgmap-dev] patch for crash in MapSource Hi Gerd I can see that , but again no probs here when I used your map For my final trial i used some pbf files of the UK which were split last year without the align for dem option This still worked !, ie no crashes ; good point - have to check if the dem poly includes empty hgt files. Will do some more checking tomorrow. Again, congratulations on a major achievement! Nick On 08/02/2018 20:36, Gerd Petermann wrote:
Hi Nick,
okay, sounds good. Do you also use -dem-poly or hgt files with voids? I tested a rather small polygon [1] divided into 10 parts, maybe that created more stress for MapSource.
Maybe we can find other --align-for-dem values or -even better - a field in TRE or DEM or TDB that can be changed to allow more or all values.
Gerd
[1] http://files.mkgmap.org.uk/download/412/baddem6b.7z
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von osm@pinns <osm@pinns.co.uk> Gesendet: Donnerstag, 8. Februar 2018 21:22 An: mkgmap-dev@lists.mkgmap.org.uk Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Hi Gerd,
Having difficulty creating long distances without stopovers ikn Mapsource, but that seems have been the case anyway before dem, at least in my case using default style
Have created a long distance one in Basecamp, exported it in Mapsource and absolutely no problem with creating profiles! Excellent work !
If I invert the route , ie in Basecamp, and export it in mapsource, same : no issues at all
At one stage, I cannot reproduce it ,I just got a black profile, but that could be when I a dem was missing.
On 08/02/2018 19:11, Gerd Petermann wrote:
Hi Nick,
great! In my test cases I found problems with long distance routes without any stopover. Please try that as well, maybe also the inverse routes.
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von osm@pinns <osm@pinns.co.uk> Gesendet: Donnerstag, 8. Februar 2018 19:01 An: mkgmap-dev@lists.mkgmap.org.uk Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Hi Gerd
Brilliant ! have done a really spaghetti route with lots of ups and downs left and right and
seems to be working with align-for-dem=360 and even
--dem-dists=2484,3312,9942,16560
r
Nick
On 08/02/2018 17:40, Gerd Petermann wrote:
Hi all,
I've created patches for splitter and mkgmap. The binaries are here: http://files.mkgmap.org.uk/download/417/splitter.jar http://files.mkgmap.org.uk/detail/416
Please try splitter with align-for-dem=360. I found no more crashes as long as used only one dem level, e.g. dem-dists=3312 or dem-dists=9936
Maybe you find a combination of align-for-dem and dem-dists with more than one value that still works, I'll try again tomorrow.
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk><mailto:mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von Gerd Petermann <gpetermann_muenchen@hotmail.com><mailto:gpetermann_muenchen@hotmail.com> Gesendet: Donnerstag, 8. Februar 2018 13:16 An: Development list for mkgmap Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Hi all,
the patch contained a stupid bug, but there is more to this: 1) the effect of the patch depends on the dem-dists value (I assume only the one that gives the highest resolution). The higher the resolution the better it works. 2) it probably also depends on the boundaries (areas.list)
I assume now that the tile boundary from areas.list should be a certain multiples of degrees, probably different multiples for lat and lon and that the overlap simply makes sure that this boundary is within the overlapped area. Maybe the preferred multiples also depend on the dem-dist.
I'll try to find out more ...
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk><mailto:mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von osm@pinns <osm@pinns.co.uk><mailto:osm@pinns.co.uk> Gesendet: Donnerstag, 8. Februar 2018 10:33 An: mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Hi Gerd
I think you are right ,ie
start and finishing point at same level seems OK eventhough the route turns south 20miles then up again
r
Nick
On 08/02/2018 09:27, Gerd Petermann wrote:
Hi all,
okay, thanks for testing. I'll try to find a better patch. Please check: I think the patch works fine for routes which cross tile borders in horizontal direction direction but I still see problems with vertical crossing. Can you confirm that?
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk><mailto:mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von Henning Scholland <osm@hscholland.de><mailto:osm@hscholland.de> Gesendet: Donnerstag, 8. Februar 2018 09:59 An: Development list for mkgmap Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Same for me, but just did quick test. Will try on the weekend more detailed Henning On 8 Feb 2018, at 16:57, lig fietser <ligfietser@hotmail.com<mailto:ligfietser@hotmail.com><mailto:ligfietser@hotmail.com><mailto:ligfietser@hotmail.com>> wrote:
Hi Gerd,
I tested your patch but I still see frequent crashes near tile borders.
________________________________ Van: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk><mailto:mkgmap-dev-bounces@lists.mkgmap.org.uk> namens Gerd Petermann <GPetermann_muenchen@hotmail.com><mailto:GPetermann_muenchen@hotmail.com> Verzonden: woensdag 7 februari 2018 02:45:27 Aan: mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> Onderwerp: [mkgmap-dev] patch for crash in MapSource
Hi all,
attached is a patch that seems to help in many cases where --dem-poly causes crashes in MapSource "Show Profile..." A binary is here: http://files.mkgmap.org.uk/download/414/mkgmap.jar
It changes the TRE file and the *.tdb file. I still see a few crashes but maybe those are caused by other problems.
Please try and let me know your results. I found no bad impact so far, long distance routing still seems to work, but I've not tested much.
@Steve: Maybe we have to make sure that the areas in *.tdb do not overlap. In this case this patch is not yet okay.
Gerd
________________________________
mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
This version has a problem reading stylefile. It gives me the following error :Error in style:Error: (points:240): quoted word found where command expected. Could not open style. Line 240 is : amenity=guidepost | amenity=signpost | (tourism=information & information=guidepost) {add name=('$(name:de')|'$(name)'|'Wegweiser')} [0x4c01 resolution 24] this error never occured with older versions. like mkgmap- r3997. what is wrong ? thomas -------------------------------------------------- Von: "Gerd Petermann" <gpetermann_muenchen@hotmail.com> Datum: Donnerstag, 8. Februar 2018 17:40 An: "Development list for mkgmap" <mkgmap-dev@lists.mkgmap.org.uk> Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Hi all,
I've created patches for splitter and mkgmap. The binaries are here: http://files.mkgmap.org.uk/download/417/splitter.jar http://files.mkgmap.org.uk/detail/416
Please try splitter with align-for-dem=360. I found no more crashes as long as used only one dem level, e.g. dem-dists=3312 or dem-dists=9936
Maybe you find a combination of align-for-dem and dem-dists with more than one value that still works, I'll try again tomorrow.
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von Gerd Petermann <gpetermann_muenchen@hotmail.com> Gesendet: Donnerstag, 8. Februar 2018 13:16 An: Development list for mkgmap Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Hi all,
the patch contained a stupid bug, but there is more to this: 1) the effect of the patch depends on the dem-dists value (I assume only the one that gives the highest resolution). The higher the resolution the better it works. 2) it probably also depends on the boundaries (areas.list)
I assume now that the tile boundary from areas.list should be a certain multiples of degrees, probably different multiples for lat and lon and that the overlap simply makes sure that this boundary is within the overlapped area. Maybe the preferred multiples also depend on the dem-dist.
I'll try to find out more ...
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von osm@pinns <osm@pinns.co.uk> Gesendet: Donnerstag, 8. Februar 2018 10:33 An: mkgmap-dev@lists.mkgmap.org.uk Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Hi Gerd
I think you are right ,ie
start and finishing point at same level seems OK eventhough the route turns south 20miles then up again
r
Nick
On 08/02/2018 09:27, Gerd Petermann wrote:
Hi all,
okay, thanks for testing. I'll try to find a better patch. Please check: I think the patch works fine for routes which cross tile borders in horizontal direction direction but I still see problems with vertical crossing. Can you confirm that?
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von Henning Scholland <osm@hscholland.de> Gesendet: Donnerstag, 8. Februar 2018 09:59 An: Development list for mkgmap Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Same for me, but just did quick test. Will try on the weekend more detailed Henning On 8 Feb 2018, at 16:57, lig fietser <ligfietser@hotmail.com<mailto:ligfietser@hotmail.com>> wrote:
Hi Gerd,
I tested your patch but I still see frequent crashes near tile borders.
________________________________ Van: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> namens Gerd Petermann <GPetermann_muenchen@hotmail.com> Verzonden: woensdag 7 februari 2018 02:45:27 Aan: mkgmap-dev@lists.mkgmap.org.uk Onderwerp: [mkgmap-dev] patch for crash in MapSource
Hi all,
attached is a patch that seems to help in many cases where --dem-poly causes crashes in MapSource "Show Profile..." A binary is here: http://files.mkgmap.org.uk/download/414/mkgmap.jar
It changes the TRE file and the *.tdb file. I still see a few crashes but maybe those are caused by other problems.
Please try and let me know your results. I found no bad impact so far, long distance routing still seems to work, but I've not tested much.
@Steve: Maybe we have to make sure that the areas in *.tdb do not overlap. In this case this patch is not yet okay.
Gerd
________________________________
mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
Hi Thomas, the patch is based in r4107, this contains a change from Steve. I am not sure if your syntax is wrong or not. Please try this: amenity=guidepost | amenity=signpost | (tourism=information & information=guidepost) {add name='$(name:de')|'$(name)'|'Wegweiser'} [0x4c01 resolution 24] I've removed a pair of () . Gerd ________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von Thomas Morgenstern <webmaster@img2ms.de> Gesendet: Donnerstag, 8. Februar 2018 19:49 An: Development list for mkgmap Betreff: Re: [mkgmap-dev] patch for crash in MapSource This version has a problem reading stylefile. It gives me the following error :Error in style:Error: (points:240): quoted word found where command expected. Could not open style. Line 240 is : amenity=guidepost | amenity=signpost | (tourism=information & information=guidepost) {add name=('$(name:de')|'$(name)'|'Wegweiser')} [0x4c01 resolution 24] this error never occured with older versions. like mkgmap- r3997. what is wrong ? thomas -------------------------------------------------- Von: "Gerd Petermann" <gpetermann_muenchen@hotmail.com> Datum: Donnerstag, 8. Februar 2018 17:40 An: "Development list for mkgmap" <mkgmap-dev@lists.mkgmap.org.uk> Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Hi all,
I've created patches for splitter and mkgmap. The binaries are here: http://files.mkgmap.org.uk/download/417/splitter.jar http://files.mkgmap.org.uk/detail/416
Please try splitter with align-for-dem=360. I found no more crashes as long as used only one dem level, e.g. dem-dists=3312 or dem-dists=9936
Maybe you find a combination of align-for-dem and dem-dists with more than one value that still works, I'll try again tomorrow.
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von Gerd Petermann <gpetermann_muenchen@hotmail.com> Gesendet: Donnerstag, 8. Februar 2018 13:16 An: Development list for mkgmap Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Hi all,
the patch contained a stupid bug, but there is more to this: 1) the effect of the patch depends on the dem-dists value (I assume only the one that gives the highest resolution). The higher the resolution the better it works. 2) it probably also depends on the boundaries (areas.list)
I assume now that the tile boundary from areas.list should be a certain multiples of degrees, probably different multiples for lat and lon and that the overlap simply makes sure that this boundary is within the overlapped area. Maybe the preferred multiples also depend on the dem-dist.
I'll try to find out more ...
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von osm@pinns <osm@pinns.co.uk> Gesendet: Donnerstag, 8. Februar 2018 10:33 An: mkgmap-dev@lists.mkgmap.org.uk Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Hi Gerd
I think you are right ,ie
start and finishing point at same level seems OK eventhough the route turns south 20miles then up again
r
Nick
On 08/02/2018 09:27, Gerd Petermann wrote:
Hi all,
okay, thanks for testing. I'll try to find a better patch. Please check: I think the patch works fine for routes which cross tile borders in horizontal direction direction but I still see problems with vertical crossing. Can you confirm that?
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von Henning Scholland <osm@hscholland.de> Gesendet: Donnerstag, 8. Februar 2018 09:59 An: Development list for mkgmap Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Same for me, but just did quick test. Will try on the weekend more detailed Henning On 8 Feb 2018, at 16:57, lig fietser <ligfietser@hotmail.com<mailto:ligfietser@hotmail.com>> wrote:
Hi Gerd,
I tested your patch but I still see frequent crashes near tile borders.
________________________________ Van: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> namens Gerd Petermann <GPetermann_muenchen@hotmail.com> Verzonden: woensdag 7 februari 2018 02:45:27 Aan: mkgmap-dev@lists.mkgmap.org.uk Onderwerp: [mkgmap-dev] patch for crash in MapSource
Hi all,
attached is a patch that seems to help in many cases where --dem-poly causes crashes in MapSource "Show Profile..." A binary is here: http://files.mkgmap.org.uk/download/414/mkgmap.jar
It changes the TRE file and the *.tdb file. I still see a few crashes but maybe those are caused by other problems.
Please try and let me know your results. I found no bad impact so far, long distance routing still seems to work, but I've not tested much.
@Steve: Maybe we have to make sure that the areas in *.tdb do not overlap. In this case this patch is not yet okay.
Gerd
________________________________
mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
Hi, sorry forgot my posting. i have solved this problem. But: in mkgmap-r4107\examples\styles\default\inc\compat_lines Line 124 is the old error existing, diskused at 3.feb.2018. Quote # > mkgmap:carpool_compat=yes { set access=no; set mkgmap:bus=yes; set mkgmap:emergency=yes; set mkgmap:carpool=yes } Ha.. yes it could be either. My guess would be that it should be 'setaccess no' as it is followed by some of the access flags.#end quote following command gives no error : mkgmap:carpool_compat=yes { setaccess no; set mkgmap:bus=yes; set mkgmap:emergency=yes; set mkgmap:carpool=yes ;} the Equal sign after setaccess must bee replaced with space. thomas Von: Thomas Morgenstern Datum: Donnerstag, 8. Februar 2018 18:49 An: Development list for mkgmap Betreff: Re: [mkgmap-dev] patch for crash in MapSource This version has a problem reading stylefile. It gives me the following error :Error in style:Error: (points:240): quoted word found where command expected. Could not open style. Line 240 is : amenity=guidepost | amenity=signpost | (tourism=information & information=guidepost) {add name=('$(name:de')|'$(name)'|'Wegweiser')} [0x4c01 resolution 24] this error never occured with older versions. like mkgmap- r3997. what is wrong ? thomas -------------------------------------------------- Von: "Gerd Petermann" <gpetermann_muenchen@hotmail.com> Datum: Donnerstag, 8. Februar 2018 17:40 An: "Development list for mkgmap" <mkgmap-dev@lists.mkgmap.org.uk> Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Hi all,
I've created patches for splitter and mkgmap. The binaries are here: http://files.mkgmap.org.uk/download/417/splitter.jar http://files.mkgmap.org.uk/detail/416
Please try splitter with align-for-dem=360. I found no more crashes as long as used only one dem level, e.g. dem-dists=3312 or dem-dists=9936
Maybe you find a combination of align-for-dem and dem-dists with more than one value that still works, I'll try again tomorrow.
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von Gerd Petermann <gpetermann_muenchen@hotmail.com> Gesendet: Donnerstag, 8. Februar 2018 13:16 An: Development list for mkgmap Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Hi all,
the patch contained a stupid bug, but there is more to this: 1) the effect of the patch depends on the dem-dists value (I assume only the one that gives the highest resolution). The higher the resolution the better it works. 2) it probably also depends on the boundaries (areas.list)
I assume now that the tile boundary from areas.list should be a certain multiples of degrees, probably different multiples for lat and lon and that the overlap simply makes sure that this boundary is within the overlapped area. Maybe the preferred multiples also depend on the dem-dist.
I'll try to find out more ...
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von osm@pinns <osm@pinns.co.uk> Gesendet: Donnerstag, 8. Februar 2018 10:33 An: mkgmap-dev@lists.mkgmap.org.uk Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Hi Gerd
I think you are right ,ie
start and finishing point at same level seems OK eventhough the route turns south 20miles then up again
r
Nick
On 08/02/2018 09:27, Gerd Petermann wrote:
Hi all,
okay, thanks for testing. I'll try to find a better patch. Please check: I think the patch works fine for routes which cross tile borders in horizontal direction direction but I still see problems with vertical crossing. Can you confirm that?
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von Henning Scholland <osm@hscholland.de> Gesendet: Donnerstag, 8. Februar 2018 09:59 An: Development list for mkgmap Betreff: Re: [mkgmap-dev] patch for crash in MapSource
Same for me, but just did quick test. Will try on the weekend more detailed Henning On 8 Feb 2018, at 16:57, lig fietser <ligfietser@hotmail.com<mailto:ligfietser@hotmail.com>> wrote:
Hi Gerd,
I tested your patch but I still see frequent crashes near tile borders.
________________________________ Van: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> namens Gerd Petermann <GPetermann_muenchen@hotmail.com> Verzonden: woensdag 7 februari 2018 02:45:27 Aan: mkgmap-dev@lists.mkgmap.org.uk Onderwerp: [mkgmap-dev] patch for crash in MapSource
Hi all,
attached is a patch that seems to help in many cases where --dem-poly causes crashes in MapSource "Show Profile..." A binary is here: http://files.mkgmap.org.uk/download/414/mkgmap.jar
It changes the TRE file and the *.tdb file. I still see a few crashes but maybe those are caused by other problems.
Please try and let me know your results. I found no bad impact so far, long distance routing still seems to work, but I've not tested much.
@Steve: Maybe we have to make sure that the areas in *.tdb do not overlap. In this case this patch is not yet okay.
Gerd
________________________________
mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
-------------------------------------------------------------------------------- _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
Hi Gerd, I used the aligning to 360 in splitter as you suggested and x-dem-dist=3312,6624,13248,26496,52992 and it seems to work for me in both directions. I also tryed longer routes with about 1500 km, but of cause with some intermediate points. Henning Btw: I guess that I can remove the x- in front of the dem-options, am I right? On 08.02.2018 16:59, Henning Scholland wrote:
Same for me, but just did quick test. Will try on the weekend more detailed Henning On 8 Feb 2018, at 16:57, lig fietser <ligfietser@hotmail.com <mailto:ligfietser@hotmail.com>> wrote:
Hi Gerd,
I tested your patch but I still see frequent crashes near tile borders.
------------------------------------------------------------------------ *Van:* mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> namens Gerd Petermann <GPetermann_muenchen@hotmail.com> *Verzonden:* woensdag 7 februari 2018 02:45:27 *Aan:* mkgmap-dev@lists.mkgmap.org.uk *Onderwerp:* [mkgmap-dev] patch for crash in MapSource Hi all,
attached is a patch that seems to help in many cases where --dem-poly causes crashes in MapSource "Show Profile..." A binary is here: http://files.mkgmap.org.uk/download/414/mkgmap.jar
It changes the TRE file and the *.tdb file. I still see a few crashes but maybe those are caused by other problems.
Please try and let me know your results. I found no bad impact so far, long distance routing still seems to work, but I've not tested much.
@Steve: Maybe we have to make sure that the areas in *.tdb do not overlap. In this case this patch is not yet okay.
Gerd
------------------------------------------------------------------------
mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
Hi Hennning, I guess you have hgt files without voids and you don't use --dem-poly. I think in that case everything works fine. You can remove the x- when an option is documented in the help. At the moment, only one dem option is not documented: --x-dem-outside-polygon. I still try to find out what has to be changed to avoid the crash in MapSouce. I am pretty sure that the problem is not in the DEM data, but in the TRE or *.tdb file. Gerd ________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von Henning Scholland <osm@hscholland.de> Gesendet: Sonntag, 11. Februar 2018 14:10:42 An: mkgmap-dev@lists.mkgmap.org.uk Betreff: Re: [mkgmap-dev] patch for crash in MapSource Hi Gerd, I used the aligning to 360 in splitter as you suggested and x-dem-dist=3312,6624,13248,26496,52992 and it seems to work for me in both directions. I also tryed longer routes with about 1500 km, but of cause with some intermediate points. Henning Btw: I guess that I can remove the x- in front of the dem-options, am I right? On 08.02.2018 16:59, Henning Scholland wrote: Same for me, but just did quick test. Will try on the weekend more detailed Henning On 8 Feb 2018, at 16:57, lig fietser <ligfietser@hotmail.com<mailto:ligfietser@hotmail.com>> wrote: Hi Gerd, I tested your patch but I still see frequent crashes near tile borders. ________________________________ Van: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk><mailto:mkgmap-dev-bounces@lists.mkgmap.org.uk> namens Gerd Petermann <GPetermann_muenchen@hotmail.com><mailto:GPetermann_muenchen@hotmail.com> Verzonden: woensdag 7 februari 2018 02:45:27 Aan: mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> Onderwerp: [mkgmap-dev] patch for crash in MapSource Hi all, attached is a patch that seems to help in many cases where --dem-poly causes crashes in MapSource "Show Profile..." A binary is here: http://files.mkgmap.org.uk/download/414/mkgmap.jar It changes the TRE file and the *.tdb file. I still see a few crashes but maybe those are caused by other problems. Please try and let me know your results. I found no bad impact so far, long distance routing still seems to work, but I've not tested much. @Steve: Maybe we have to make sure that the areas in *.tdb do not overlap. In this case this patch is not yet okay. Gerd ________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk<mailto:mkgmap-dev@lists.mkgmap.org.uk> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
Hi Gerd Same here testing the UK Nick On 08/02/2018 08:57, lig fietser wrote:
Hi Gerd,
I tested your patch but I still see frequent crashes near tile borders.
------------------------------------------------------------------------ *Van:* mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> namens Gerd Petermann <GPetermann_muenchen@hotmail.com> *Verzonden:* woensdag 7 februari 2018 02:45:27 *Aan:* mkgmap-dev@lists.mkgmap.org.uk *Onderwerp:* [mkgmap-dev] patch for crash in MapSource Hi all,
attached is a patch that seems to help in many cases where --dem-poly causes crashes in MapSource "Show Profile..." A binary is here: http://files.mkgmap.org.uk/download/414/mkgmap.jar
It changes the TRE file and the *.tdb file. I still see a few crashes but maybe those are caused by other problems.
Please try and let me know your results. I found no bad impact so far, long distance routing still seems to work, but I've not tested much.
@Steve: Maybe we have to make sure that the areas in *.tdb do not overlap. In this case this patch is not yet okay.
Gerd
_______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
participants (6)
-
Gerd Petermann -
Gerd Petermann
-
Henning Scholland -
lig fietser -
osm＠pinns -
Thomas Morgenstern