Hi Steph. I need the merged OSM file, not the img file. I want to find out what additional objects are written to the overview map when the bano data is included. Maybe the merge itself produces wrong data? I remember other data sources where the ids conflicted with real OSM data. The typical result are lots of very long ways when you load the tile into JOSM. Gerd ________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von Steph <st3ph.martin@laposte.net> Gesendet: Sonntag, 24. Mai 2020 13:02 An: mkgmap-dev@lists.mkgmap.org.uk Betreff: Re: [mkgmap-dev] Compilation fails building France map Hi Gerd, No other error messages. And the working directory was clean before testing with default style, I'm pretty sure… 🙄 Anyway, I make a new test and upload the tile you have requested. Steph Le 24/05/2020 à 13:49, Gerd Petermann a écrit :
Hi Steph,
just to make sure: There are no other error messages from splitter or mkgmap, right? And you used a clean directory without any possibly corrupted artifacts?
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von Gerd Petermann <gpetermann_muenchen@hotmail.com> Gesendet: Sonntag, 24. Mai 2020 12:39 An: mkgmap-dev@lists.mkgmap.org.uk Betreff: Re: [mkgmap-dev] Compilation fails building France map
Hi Steph,
address data is stored with the roads in the NET file and normally the overview map doesn't contain many roads.
Please upload a single tile of bano data merged with OSM data to http://files.mkgmap.org.uk/ and the mkgmap options that you use with the default style.
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von Stéphane MARTIN <st3ph.martin@laposte.net> Gesendet: Sonntag, 24. Mai 2020 12:16 An: mkgmap-dev@lists.mkgmap.org.uk Betreff: Re: [mkgmap-dev] Compilation fails building France map
Hi!
I made a few tests according to Gerd and Joris instructions.
My style is not so heavy for overview map and all modifications I tried to make it lighter failed. So I replaced my style with default style and mapnik typ within my scripts… that failed !
The fact is I merge a national addresses db (BANO -> http://bano.openstreetmap.fr/data) with the Geofabrik pbf before running splitter. If I don't make this merging, compilation run fine.
So it appears that it's not an “esthetic” map particularity but address data which produce issues, if I got it right… And of course I don't know why 😂
Thanks again.
Regards!
Steph
Le 23/05/2020 à 19:18, Joris Bo a écrit :
Hi Steph
I had these kinds of problems in my early days when trying to build a full-europe map. I'm not the expert, but what I find out was that it I looks like the overviewmap is one big *.img file And so combines everything you put in your lower overview levels 17,16,15,14 & 12 together Above the overview levels (18-24) multiple tiles are created giving you an 'endless' amount of space but for the overview levels its whatever fits in this one img file. There is a limit (don't know how much) (If I remember correctly I even had to wait 6 hours before at the very end the overview map was written and failed the process)
For me, it did not help to use less levels but just limiting the amount of stuf drawn starting from 12 to 17 I adjusted 98% of my polygons and lines to be sure they start above 17 and/or use the --polygon-size-limits option to filter out smaller pieces.
For now I can build a full Europe map including France and it still fits within the overview limits For the overview map levels I only use - motorway, trunk and primary (but not the motorway_link, trunk_link and primarylink) - for every level 12-14-15-16-17 I even use a different line code and line-width only because it just looks nice when zooming in - no tunnels, bridges, railways or oneway - Only waterways if the water-way relation is tagged longer dan 50km - Only residential landuse to highlight city area's - Only natural = * & area_size() > 2000000 (which is approximately 3km x 3km)
Since then, problems gone Kind regards Joris
-----Oorspronkelijk bericht----- Van: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> Namens Steph Verzonden: zaterdag 23 mei 2020 11:09 Aan: Development list for mkgmap <mkgmap-dev@lists.mkgmap.org.uk> Onderwerp: Re: [mkgmap-dev] Compilation fails building France map
Thank you !
Got the same levels and overview-levels as default style. levels = 0:24, 1:22, 2:20, 3:18 overview-levels = 4:17, 5:16, 6:15, 7:14, 8:12
How can I make overview lighter ? Supressing a level ? Decrease max-nodes with splitter ?
Steph
Le 23/05/2020 à 11:50, Gerd Petermann a écrit :
Hi Steph,
it seems your overview map contains too many details. Compare the options levels and overview-levels with the default style.
Gerd
________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von Steph <st3ph.martin@laposte.net> Gesendet: Samstag, 23. Mai 2020 10:07 An: Development list for mkgmap Betreff: [mkgmap-dev] Compilation fails building France map
Hi,
Since a couple of days the compilation for my France map fails.
Perhaps the output log could help you to indicate me the direction I should investigate.
- mkgmap-r4486 - java -version: openjdk version "13.0.2" 2020-01-14 OpenJDK Runtime Environment (build 13.0.2+8) OpenJDK 64-Bit Server VM (build 13.0.2+8, mixed mode)
- France.log: Time started: Sat May 23 10:15:31 EAT 2020 The following styles are available: default 1.27: "Default style" modifié. Style détaillé pour un usage pédestre mais fonctionnel aussi en usage cycliste ou motorisé. Found one style in /home/steph/osm/styles/default/ finished check-styles Number of MapFailedExceptions: 0 Exception in thread "main" java.lang.AssertionError: 164041 at uk.me.parabola.imgfmt.app.BufferedImgFileWriter.put2u(BufferedImgFileWriter.java:164) at uk.me.parabola.imgfmt.app.trergn.Zoom.write(Zoom.java:81) at uk.me.parabola.imgfmt.app.trergn.TREFile.writeMapLevels(TREFile.java:215) at uk.me.parabola.imgfmt.app.trergn.TREFile.writeBody(TREFile.java:123) at uk.me.parabola.imgfmt.app.trergn.TREFile.write(TREFile.java:342) at uk.me.parabola.mkgmap.build.MapBuilder.makeMap(MapBuilder.java:305) at uk.me.parabola.mkgmap.combiners.OverviewBuilder.writeOverviewMap(OverviewBuilder.java:191) at uk.me.parabola.mkgmap.combiners.OverviewBuilder.onFinish(OverviewBuilder.java:104) at uk.me.parabola.mkgmap.main.Main.endOptions(Main.java:674) at uk.me.parabola.mkgmap.CommandArgsReader.readArgs(CommandArgsReader.java:125) at uk.me.parabola.mkgmap.main.Main.mainStart(Main.java:143) at uk.me.parabola.mkgmap.main.Main.main(Main.java:114)
Two little overlays (for ski resorts and particular osm tags I want to verify) are correctly produce. The main map compilation fails!
Regards.
Steph
mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev