I have the same problem , with splitter for australia , or australia-oceania even when i have search limit at 60,000 or 90,000 or in between these Figures I stil get the same response in splitter log file . Stephen On Fri, Mar 25, 2016 at 4:33 PM, Gerd Petermann < GPetermann_muenchen@hotmail.com> wrote:
Hi Patrik,
good question. I also wondered if splitter can be changed to ignore wrong bounds
tags. My thoughts:
In your case the bbox is far too large, means it claims to contain data that is not there.
The normal case is vice versa: The file contains some nodes outside of the bbox,
maybe from ferry lines or other long ways, and my understanding is that we don't
want to calculate the tiles based on those few nodes, since we might get a map with
larger empty areas at the "border". No idea if that would cause more trouble.
With typical data from geofabrik and the --no-trim option there will always be large
empty areas as most countries are not rectangular ;-)
Possible changes in the code:
1) add a --ignore-osm-bounds option and set the default to false (means one gets
the same result like now when he uses the default)
2) add a --use-osm-bounds option and set the default to false
(means one might get a different result when using the default)
3) add code to check how the collected data matches the given bounds,
use whatever is smaller. This might also be triggered by an option if needed.
I'd like to get some feedback from others first.
Gerd
------------------------------ *Von:* mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von KeenOnKites <keenonkites@gmx.net> *Gesendet:* Freitag, 25. März 2016 00:13 *An:* mkgmap-dev@lists.mkgmap.org.uk *Betreff:* Re: [mkgmap-dev] Problem with splitter: Failed to find a correct split
Gerd,
I couldn't go to sleep without getting to the ground of this...
I performed the following tests on linux, always with my standard --no-trim present:
- original osm.pbf file downloaded from geofabrik (with the problematic bounds tag in it) -> FAILURE - converted with the help of osmconvert to normal osm format -> FAILURE (which was to be expected, same file, just different format) - deleted the osm tag with a simple command like 'cat file.osm | grep -v bounds > file-nobounds.osm' and ran splitter against it, always with the same options -> SUCCESS
This leads me to the question why the bounds tag is read/used if it also works without and even gives less problem ?
.... sorry for bombarding you (and the list), but I think it's nevertheless and interesting question.
Cheers Patrik
On 24.03.2016 23:51, KeenOnKites wrote:
Gerd,
I did dig a bit deeper... also as it rang a bell: we had quite a similar problem with the wrong bounding box in Alaska already October 2014. It was an illegal value of maxlon="180.0005" causing splitter to bail out
When I convert the osm.pbf file with the help of osmconvert to osm and look at the first few lines I see a 'bounds' tag announcing the problematic bounding box (not illegal as in 2014, but still 'suboptimal'):
<?xml version='1.0' encoding='UTF-8'?> <osm version="0.6" generator="osmconvert 0.8.2" timestamp="2016-03-23T20:13:02Z"> <bounds minlat="49.8089" minlon="-179.9532" maxlat="73.79794" maxlon="179.9999"/> <node id="27207079" lat="64.7487541" lon="-147.3242821" version="2" ...
Getting the statistics via osmconvert with --out-statistics seems to read through the file and checks the 'real' bounding box:
... lon min: -180.0000000 lon max: -122.5122525 lat min: 48.6234931 lat max: 71.6061501 ...
I'm now wondering if splitter get's confused by the existing but obviously strange bounds tag.
According to the findings in 2014 splitter can handle files without the bounds tag and just gets the real boundings from all the elements in the file. I did not test to run it through splitter without the bounds tag as I'm having troubles converting the file properly on my windows... but I'll try that probably tomorrow again on linux (sort of late already today). The process would be
osm.pbf -> osm -> get rid of the bounds tag -> back to osm.pbf again (to have same source file format) .... and then run the splitter and see what happens.
But if I have a proper osm file with the 'problematic' bounds tag in it, I can also try to reproduce the problem with the osm file. If it is reproducible I just drop the tag and try it again.
BTW: I've contacted geofabrik already via email
Patrik
On 24.03.2016 22:27, KeenOnKites wrote:
Gerd,
I'll play a bit more with this option and check what suits me best.
Again thanks for the incredibly quick answer to my problem/question.
Cheers Patrik
On 24.03.2016 22:20, Gerd Petermann wrote:
Hi Patrik,
I think the wanted effect of the no-trim option is a rectangular map,
which some people prefer, esp. on the PC.
Gerd
------------------------------ *Von:* mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> <mkgmap-dev-bounces@lists.mkgmap.org.uk> <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von KeenOnKites <keenonkites@gmx.net> <keenonkites@gmx.net> *Gesendet:* Donnerstag, 24. März 2016 22:16 *An:* mkgmap-dev@lists.mkgmap.org.uk *Betreff:* Re: [mkgmap-dev] Problem with splitter: Failed to find a correct split
Gerd,
Sorry, your explanations came in during I was writing up the test results ...
Think it's all clear so far.
As we're creating lot of different maps I'm just wondering if I can/should drop the option --no-trim for all map building or if I would suddenly run into other/new problems...
I'll contact geofabrik with the details.
Many thanks and happy Easter. Patrik
On 24.03.2016 22:07, Gerd Petermann wrote:
Hi Patrik,
I don't need the files, I downloaded the alaska file and tried some variants.
See also my last post, send a few minutes ago.
Gerd
------------------------------ *Von:* mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von Patrik Brunner <patrik.brunner@gmx.net> <patrik.brunner@gmx.net><patrik.brunner@gmx.net> <patrik.brunner@gmx.net> *Gesendet:* Donnerstag, 24. März 2016 22:03 *An:* mkgmap-dev@lists.mkgmap.org.uk *Betreff:* Re: [mkgmap-dev] Problem with splitter: Failed to find a correct split
Gerd,
Yes, alaska.osm.pbf is small.
It works without --no-trim. And it also works with the polygon file that belongs to alaska.osm.pbf (also downloaded from Geofabrik) which, according to documentation, anyway would disable --no-trim option.
Do you still need the resulting densities-out of the failure ? It's about 700 kb... if yes, how should I provide it ? Just attach it here ?
You have to excuse my question, I'm not the crack: is this now a problem of the pbf file, or the splitter ? ... or just the way I try to use it ?
Thanks already now for your help. Patrik
On 24.03.2016 21:14, Gerd Petermann wrote:
Ahh, sorry, I just noticed that the file alaska.osm.pbf is small.
The problem is here is that the bounding box spans from -180 to 180,
but this box is most empty. I have to run splitter now to find the details.
It works without --no-trim, probably also with an appropriate polygon file.
Does that help?
Gerd ------------------------------ *Von:* mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von Gerd Petermann <GPetermann_muenchen@hotmail.com><GPetermann_muenchen@hotmail.com> <GPetermann_muenchen@hotmail.com> *Gesendet:* Donnerstag, 24. März 2016 21:01 *An:* Development list for mkgmap *Betreff:* Re: [mkgmap-dev] Problem with splitter: Failed to find a correct split
Hi Patrik,
please provide the complete log from splitter and the densities-out.txt
Gerd
------------------------------ *Von:* mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> <mkgmap-dev-bounces@lists.mkgmap.org.uk> <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag von KeenOnKites <keenonkites@gmx.net><keenonkites@gmx.net> <keenonkites@gmx.net> *Gesendet:* Donnerstag, 24. März 2016 20:25 *An:* Development list for mkgmap *Betreff:* [mkgmap-dev] Problem with splitter: Failed to find a correct split
Hello together,
I'm running into a problem with the splitter (r435 aswell as r427) when splitting the US_ALASKA file downloadable from Geofabrik.
The exception is:
Warning: No solution found for partition (49.7900390625,-179.9560546875) to (73.828125,180.0) with 6'702'717 nodes uk.me.parabola.splitter.SplitFailedException: Failed to find a correct split at uk.me.parabola.splitter.SplittableDensityArea.split(SplittableDensityArea.java:152) at uk.me.parabola.splitter.SplittableDensityArea.split(SplittableDensityArea.java:196) at uk.me.parabola.splitter.Main.calculateAreas(Main.java:645) at uk.me.parabola.splitter.Main.split(Main.java:258) at uk.me.parabola.splitter.Main.start(Main.java:187) at uk.me.parabola.splitter.Main.main(Main.java:157)
The complete command line with the splitter call is:
java -Xmx1536M -jar D:/fzk/develop/fzk-mde-garmin/Freizeitkarte-Entwicklung/tools/splitter/splitter.jar --max-threads=2 --geonames-file=D:/fzk/develop/fzk-mde-garmin/Freizeitkarte-Entwicklung/cities/c ities15000.zip --no-trim --precomp-sea=D:/fzk/develop/fzk-mde-garmin/Freizeitkarte-Entwicklung/sea --keep-complete=true --mapid=98200001 --max-nodes=800000 --output=xml --output-dir=D:/fzk/develop/fzk -mde-garmin/Freizeitkarte-Entwicklung/work/Freizeitkarte_US_ALASKA D:/fzk/develop/fzk-mde-garmin/Freizeitkarte-Entwicklung/work/Freizeitkarte_US_ALASKA/Freizeitkarte_US_ALASKA.osm.pbf
The pbf source file comes from:
<http://download.geofabrik.de/north-america/us/alaska-latest.osm.pbf> http://download.geofabrik.de/north-america/us/alaska-latest.osm.pbf
The osmconvert statistics about that file is:
PS Freizeitkarte-Entwicklung> .\tools\osmconvert\windows\osmconvert.exe .\work\Freizeitkarte_US_ALASKA\Freizeitkarte_US_ALASKA.osm.pbf --out-statistics timestamp min: 2007-06-05T03:23:59Z timestamp max: 2016-03-23T05:41:43Z lon min: -180.0000000 lon max: -122.5122525 lat min: 48.6234931 lat max: 71.6061501 nodes: 4360214 ways: 185550 relations: 2245 node id min: 27207079 node id max: 4072166815 way id min: 4708608 way id max: 404980503 relation id min: 13971 relation id max: 6033189 keyval pairs max: 310 keyval pairs max object: relation 60189 noderefs max: 2000 noderefs max object: way 42394334 relrefs max: 681 relrefs max object: relation 3337277 PS Freizeitkarte-Entwicklung>
Interesting to mention: - splitter exception mentiones a complete different coverage area than osmconvert statistics. - the area is near -180 / +180... always complicated.
Do I miss something ? All other pbf's I've tried are splitting properly without any problems. Do I need to change something in the arguments ? Or is it a simple problem of the actual pbf file ?
Any ideas are very welcome....
Cheers Patrik
_______________________________________________ mkgmap-dev mailing listmkgmap-dev@lists.mkgmap.org.ukhttp://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________ mkgmap-dev mailing listmkgmap-dev@lists.mkgmap.org.ukhttp://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________ mkgmap-dev mailing listmkgmap-dev@lists.mkgmap.org.ukhttp://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________ mkgmap-dev mailing listmkgmap-dev@lists.mkgmap.org.ukhttp://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________ mkgmap-dev mailing listmkgmap-dev@lists.mkgmap.org.ukhttp://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev