Hi all, the default style contains these rules for roundabouts: # Roundabouts junction=roundabout & (highway=trunk | highway=trunk_link) [0x0c road_class=3 road_speed=2 resolution 18] junction=roundabout & (highway=primary | highway=primary_link) [0x0c road_class=3 road_speed=2 resolution 19] junction=roundabout & (highway=secondary | highway=secondary_link) [0x0c road_class=2 road_speed=2 resolution 20] junction=roundabout & (highway=tertiary | highway=tertiary_link) [0x0c road_class=1 road_speed=1 resolution 21] junction=roundabout & highway=unclassified [0x0c road_class=1 road_speed=1 resolution 21] junction=roundabout & highway=* [0x0c road_class=0 road_speed=1 resolution 22] The wanted effect is that the Garmin device/software produces hints like "enter roundabout" or "Take the 2nd right onto" ... The disadvantage is that the roundabout is not rendered. I replaced all the above rules by junction=roundabout & highway=* [0x0c road_class=0 road_speed=0 resolution 24 continue] I tried this with car + bicycle routing and it seems to give the expected results (routing hints and rendered roads). Also the --check-roundabouts option doesn't complain. Alternative might be to keep the distinction of road types for better time estimation, important point is that "resoltion 24 continue " is used. Comments? Gerd