Thank you Ticker and Gerdfor some reason i've been to restrictive in my device using 'Avoidence Setup' Problem solvedMit freundlichem Gruß Manfred Haiduk -------- Ursprüngliche Nachricht -------- Von: Ticker Berkin <rwb-mkgmap@jagit.co.uk> Datum: 13.10.2020 10:42 (GMT+01:00) An: Development list for mkgmap <mkgmap-dev@lists.mkgmap.org.uk> Betreff: Re: [mkgmap-dev] Routing problem on GPSMAP 276Cx HiAlso:Routes through ferry terminals often involve service roads with a lowroad-class. Fastest time routing avoids using lower class roads in themiddle of a journey.Again, in a terminal there are often barriers and roads marked asaccess=customer or similar and these might set mkgmap:throughroute=no,again preventing routing.In complex terminals, there often isn't a clear route through onto theferry - I spent a while examining the terminals at both ends of a ferryand fixing various one-ways etc.Finally, after the doing the above, I still couldn't make thisparticular ferry work. Changing the ferry to a standard road didn't fixit. I could route from just outside one terminal to just outside theterminal at the other end, but not to points further along the road. Ithink there might be a problem with the internal routing structures(RouteCenter) where there is a single long distance as the onlyconnection within a RouteCenter and this is also the only connectionbetween the other RouteCenters at either end.TickerOn Tue, 2020-10-13 at 07:19 +0000, Gerd Petermann wrote:> Hi Manfred,> > did you make sure that the transport mode on your device is> configured to allow usage of ferries?> > Gerd> > ________________________________________> Von: mkgmap-dev <mkgmap-dev-bounces@lists.mkgmap.org.uk> im Auftrag> von Manfred Haiduk <mhaiduk@t-online.de>> Gesendet: Sonntag, 11. Oktober 2020 19:26> An: Development list for mkgmap> Betreff: [mkgmap-dev] Routing problem on GPSMAP 276Cx> > Hi all> > might be i stumbled again over a silly problem on my GPSMAP 276Cx.> Try> to route from my Hometown Hürtgenwald to Bad Honnef. The most obvious> way to do that is using the ferry Rolandseck <-> Bad Honnef.> MapSource> will use it but it seems, that the Garmin Device refuse to use any> ferry> routing, it chooses always a routing using bridges. Any idea, what> could> be wrong ?> > --> > Mit freundlichen Grüßen> > #####################################################> Manfred Haiduk,> Zum Fischbach 9,> 52393 Hürtgenwald> e-mail mhaiduk@t-online.de> #####################################################> > _______________________________________________> mkgmap-dev mailing list> mkgmap-dev@lists.mkgmap.org.uk> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev> _______________________________________________> mkgmap-dev mailing list> mkgmap-dev@lists.mkgmap.org.uk> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev________________________... mailing listmkgmap-dev@lists.mkgmap.org.ukhttp://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev