gerd p would love more on the routing mate in my map but when i tried before to upgrade the script file , it did not work may be i send the script file i use , so you can help me convert it over to the new scripting you do mate or provide me with plenty of examples and i can try gerd stephen On Wed, Jan 7, 2015 at 5:11 PM, Gerd Petermann < gpetermann_muenchen@hotmail.com> wrote:
Hi Stephen,
okay, I forgot to ask you about other details: 1) You use options like --process-exits and other used for routing, but your style doesn't set any of the access attributes like mkgmap:car, mkgmap:foot etc which are needed to get proper routing info in the map. I guess you don't care about routing?
2) Your cmd file contains the option --pois-to-areas-placement=tagelist I think this is a very old typo which overrides a good default: pois-to-areas-placement=entrance=main;entrance=yes;building=entrance
Please check the docu about the meaning: http://www.mkgmap.org.uk/doc/options
Gerd
------------------------------ Date: Wed, 7 Jan 2015 16:57:41 +1000 From: steve.sgalowski@gmail.com To: mkgmap-dev@lists.mkgmap.org.uk Subject: Re: [mkgmap-dev] Problem in splitter (Africa)
gerd , have tried some of your ideas no not all worked for me however have worked out and are combining my poi strings am re checking now with the new poi test file you have just uploaded to mkgmap server
stephen
On Tue, Jan 6, 2015 at 7:54 PM, Gerd Petermann < gpetermann_muenchen@hotmail.com> wrote:
Hi Stephen,
yes, you should have received an answer a now.
Gerd
------------------------------ Date: Tue, 6 Jan 2015 19:15:51 +1000 From: steve.sgalowski@gmail.com To: mkgmap-dev@lists.mkgmap.org.uk Subject: Re: [mkgmap-dev] Problem in splitter (Africa)
gerd P
did you get my direct e-mail to you sir
stephen
On Tue, Jan 6, 2015 at 10:18 AM, GerdP <gpetermann_muenchen@hotmail.com> wrote:
Hi Stephen,
the log shows no problems. Why do you think that max-nodes=400000 doesn't work? Do you see an error message in mkgmap? If yes, please provide your style files so that I can reproduce the problem. Maybe your style still adds one POI for each point of each highway?
Gerd
steve sgalowski wrote
canada splitter log file as expected , looks like i was correct the size of the split has to be smaller stephen
On Tue, Jan 6, 2015 at 7:25 AM, Carlos Dávila <
cdavilam@
wrote:
Final file size depends on the amount of data in the input, not on the value of max-nodes. If you need a final img smaller than a given size you have to reduce the area covered by the input file or reduce the number of osm elements from the input that go into the map playing with your style files.
El 05/01/15 a las 22:07, Steve Sgalowski escribió:
gerd and carlos i am now running the splitter log file setup on my canada map and see what it does , the end result on this map = 6.8 gb img file wonder why some country can exceed and others not stephen
On Tue, Jan 6, 2015 at 7:00 AM, Carlos Dávila <
cdavilam@
<mailto:
cdavilam@
wrote:
Not sure what you mean. If you split a given country in a higher number of tiles (lower max-nodes) final size will be the same or slightly bigger, as there are more duplicated info due to overlap. Or you are loosing some information in the process to reduce final file size.
El 05/01/15 a las 21:34, Steve Sgalowski escribió:
in some of the countries i do , if i dont make the node count small , the map size exceedds , size limit of 3 gb then unshure how , canada has done this ok
stephen
On Tue, Jan 6, 2015 at 5:24 AM, Gerd Petermann <
gpetermann_muenchen@
<mailto:
gpetermann_muenchen@
<mailto:
gpetermann_muenchen@
<mailto:
gpetermann_muenchen@
wrote:
Hi all,
I wonder what splitter should do in this case:
Stephen uses paramter --max-nodes=80000 and splitter reports "Highest node count in a single grid element is 557,084"
It is obvious that at least one tile will have much more than the requested 80.000 nodes, on the other hand, the file africa.osm.pbf contains large nearly empty areas, and that makes it very difficult to find a good split. The current version r416 fails because it doesn't accept tiles with less than 5% of the max-nodes value, so it searches for a solution where every tile has at least 4000 nodes, and that might not exist.
I see these options: 1) splitter can continue trying to split the data, accepting almost empty output files (e.g. some with < 5 nodes and very high aspect ratios like 32) 2) if that fails, splitter can set the max-nodes value to 557,084 and try again 3) or stop with an error message that tells the user that it is not possible to split with the used resolution 4) or restart using a higher resolution (15 would be required here instead of 13),
@Stephen What reason do you have to use such a small max-nodes value? Would it be ok for you to use a higher one?
Gerd
_______________________________________________ mkgmap-dev mailing list
mkgmap-dev@.org
_______________________________________________ mkgmap-dev mailing list
mkgmap-dev@.org
http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
splitter.log (356K) <http://gis.19327.n5.nabble.com/attachment/5829156/0/splitter.log>
-- View this message in context: http://gis.19327.n5.nabble.com/Problem-in-splitter-Africa-tp5829130p5829158.... Sent from the Mkgmap Development mailing list archive at Nabble.com. _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev